Heat treatment of AISI 430L stainless steel sintered in N2-H2 atmosphere

Authors

  • J. M. Ruiz-Román Universidad Politécnica de Madrid. Departamento de Ingeniería de Materiales
  • F. Corpas E.U. Politécnica de Linares. Dpto. de Ingeniería Química, Ambiental y de los Materiales (Jaén)
  • F. J. Iglesias E.U. Politécnica de Linares. Dpto. de Ingeniería Química, Ambiental y de los Materiales (Jaén)
  • L. E. G. Cambronero Universidad Politécnica de Madrid. Departamento de Ingeniería de Materiales
  • J. M. Ruiz-Prieto Universidad Politécnica de Madrid. Departamento de Ingeniería de Materiales

DOI:

https://doi.org/10.3989/revmetalm.2005.v41.iExtra.1038

Keywords:

Powder metallurgy, Stainless steel, Heat treatment, Nitrogen

Abstract


In this Work the influence of sintering AISI 430L stainless steel in N2-H2 atmosphere on its properties and microstructure have been studied. The presence of nitrogen in the sintering atmosphere leads to complex nitrides formation the AISI 430L sintered steel microstructure. A subsequent heat treatment was applied to modify this microstructure in order to improve the mechanical properties and corrosion resistance of these ferritic stainless steels.

Downloads

Download data is not yet available.

Downloads

Published

2005-12-17

How to Cite

Ruiz-Román, J. M., Corpas, F., Iglesias, F. J., G. Cambronero, L. E., & Ruiz-Prieto, J. M. (2005). Heat treatment of AISI 430L stainless steel sintered in N2-H2 atmosphere. Revista De Metalurgia, 41(Extra), 269–273. https://doi.org/10.3989/revmetalm.2005.v41.iExtra.1038

Issue

Section

Articles