A study on the welded joins for pipelines

Authors

  • J. Montero Escuela Politécnica Superior. Universidade da Coruña
  • A. García Escuela Politécnica Superior. Universidade da Coruña
  • A. Varela Escuela Politécnica Superior. Universidade da Coruña
  • S. Zaragoza Escuela Politécnica Superior. Universidade da Coruña
  • R. Artiaga Escuela Politécnica Superior. Universidade da Coruña
  • J. L. Mier Escuela Politécnica Superior. Universidade da Coruña

DOI:

https://doi.org/10.3989/revmetalm.2008.v44.i2.105

Keywords:

Wear, Welding, Hardness

Abstract


This study deals with the wear experienced in the welded joins for pipelines. Its aim is to minimise the problems caused by this wear. An analysis is carried out on the tribological behaviour of three crucial areas within the welding: the basic metal, the heat-affected zone and the weld bead zone itself. The differences in mechanical properties between these areas are evaluated. Moreover, various alternatives in the welding process are proposed in an effort to improve the global behaviour of the join.

Downloads

Download data is not yet available.

References

[1] P. L. Hurricks, Wear 26 (1973) 285-304. doi:10.1016/0043-1648(73)90184-1

[2] S.N. Krishnan, V. Toppo, A. Basak y K.K. Ray, Wear 260 (2006) 1.285-1.294

[3] P. K. Kolhe y C. K. Datta, Indian Welding Journal 37 (2004) 39-41.

[4] S.N. Krishnan, A. Basak y K.K. Ray, Metals, Materials and Processes 16 (2004) 375-384.

[5] C. Garcia, M. P. De Andres, Rev. Metal. Madrid 18 (1982) 329-347.

[6] S. F. Medina, P. Fabregue y V. Lopez, Rev. Metal. Madrid 25 (1989) 238-246.

[7] M. P. De Andres, C. Garcia, V. Lopez y J.M. Casals, Rev. Metal. Madrid 11 (1975) 171-184.

[8] M. P. De Andres, Rev. Metal. Madrid 11 (1975) 103-118.

[9] J. M. Bello, M. P. De Andres, F. Munoz Del Corral, Rev. Metal. Madrid 5 (1969) 401-11.

[10] J. Kalousek, D.M. Fegredo y E.E. Laufer, Proc. Int. Conf. Wear of Materials (1985) 212-231.

[11] D. M. Fegredo, M. T. Shehata, A. Palmer, J. Kalousek, Wear 126 (1988) 285-306. doi:10.1016/0043-1648(88)90171-8

[12] P. Clayton y R. Devanathan, Wear 156 (1992) 121-131. doi:10.1016/0043-1648(92)90148-2

[13] D. M. Fegredo, J. Kalousek y M.T. Shehata, Wear 161 (1993) 29-40. doi:10.1016/0043-1648(93)90450-Z

[14] ASTM G99-05, Standard test method for wear testing with a pin-on-disk apparatus, ASTM, 203.

Downloads

Published

2008-04-30

How to Cite

Montero, J., García, A., Varela, A., Zaragoza, S., Artiaga, R., & Mier, J. L. (2008). A study on the welded joins for pipelines. Revista De Metalurgia, 44(2), 170–175. https://doi.org/10.3989/revmetalm.2008.v44.i2.105

Issue

Section

Technical Notes

Most read articles by the same author(s)

1 2 > >>