Influence mutual of the deformation and chemical composition on induced precipitation in microalloyed steels

Authors

  • A. Quispe Centro Nacional de Investigaciones Metalúrgicas (CENIM), CSIC
  • S. F. Medina Centro Nacional de Investigaciones Metalúrgicas (CENIM) - Consejo Superior de Investigaciones Científicas (CSIC)
  • M. Gómez Centro Nacional de Investigaciones Metalúrgicas (CENIM), CSIC

DOI:

https://doi.org/10.3989/revmetalm.2005.v41.iExtra.1061

Keywords:

Deformation, Microalloyed steel, RPTT diagram, Precipitation kinetics, Incubation time

Abstract


By means of torsion tests and applying the "back extrapolation" method, the static recrystallization kinetics in microalloyed steels with vanadium (V), niobium (Nb) and titanium (Ti) has been determined and, recrystallization-precipitation-time-temperature (RPTT) diagrams have been plotted also graphically, which show the Recrystallization- Precipitation interaction. These diagrams show that the effect of the deformation on the precipitation kinetics depends of the microalloy content. In this sense, a new expression is proposed to relate the influence of the deformation and the chemical composition on the minimum incubation of the precipitation kinetics.

Downloads

Download data is not yet available.

Downloads

Published

2005-12-17

How to Cite

Quispe, A., Medina, S. F., & Gómez, M. (2005). Influence mutual of the deformation and chemical composition on induced precipitation in microalloyed steels. Revista De Metalurgia, 41(Extra), 384–389. https://doi.org/10.3989/revmetalm.2005.v41.iExtra.1061

Issue

Section

Articles