Evaluation of superficial oxidation layer ofTi6Al4V laser cladding coatings

Authors

  • V. Amigó 1ITM-UPV
  • J. J. Candel 1ITM-UPV
  • J. M. Amado Departamento de Ingeniería Industrial II, Universidade da Coruña
  • A. Yañez Departamento de Ingeniería Industrial II, Universidade da Coruña

DOI:

https://doi.org/10.3989/revmetalm.02XIIPMS

Keywords:

Laser cladding, Titanium alloys, Oxidation, Hardness

Abstract


It has been studied the influence of processing parameters on the superficial oxidation and mechanical properties of different coatings of Ti6Al4V. The high chemical reactivity of titanium powder, and the high temperature reached during laser processing, produces a great variety of colors in the oxides formed. This oxidation can have a detrimental effect on the behavior in service so that its evaluation is essential. Although the influence of processing on the color of the oxides formed is clear, there is no simple relationship to explain its mechanical properties. For this reason it has been applied a methodology based on microscopy, microanalysis wavelength spectroscopy (WDS) and nanoindentation. The results indicate no significant differences in hardness and elastic modulus between two coatings with different colors of oxidation.

Downloads

Download data is not yet available.

References

[1] Y.S. Tian, C.Z. Chen, S.T. Li y Q.H. Huo, Appl. Surf. Sci. 242 (2005) 177-184. doi:10.1016/j.apsusc.2004.08.011

[2] S. Yang, W. Liu, M. Zhong y Z. Wang, Mater. Lett. 58 (2004) 2.958-2.962.

[3] I. Vicario, C. Soriano, C. Sanz y R. Bayón, Rev. Metal. Madrid 45 (2009) 14-19.

[4] H. Guleryuz y H. Cimenoglu, Surf. Coat. Technol. 192 (2005) 164-170. doi:10.1016/j.surfcoat.2004.05.018

[5] J. Alcisto, A. Enriquez, H. Garcia, S. Hinkson y M. Hahn, Eng. Fail. Analysis 11 (2004) 811-816 doi:10.1016/j.engfailanal.2004.04.001

[6] ANSI AWS D17.1:2001, Specification for fusion welding aerospace applications.

[7] M. Corzo, O. Casals, J. Alcalá y A.Mateo. Rev. Metal. Madrid 41 (2005) 406-409.

[8] ASM Handbook Vol. 06: Welding, Brazing and Soldering, D.L. Olson, T.A. Siewert, S. Liu and G.R. Edwards (Eds.), ASMInternational, Ohio, EE. UU., 1993, pp. 1.289-1.319.

Downloads

Published

2010-12-31

How to Cite

Amigó, V., Candel, J. J., Amado, J. M., & Yañez, A. (2010). Evaluation of superficial oxidation layer ofTi6Al4V laser cladding coatings. Revista De Metalurgia, 46(Extra), 13–18. https://doi.org/10.3989/revmetalm.02XIIPMS

Issue

Section

Articles

Most read articles by the same author(s)

1 2 3 > >>