The recycling of end-of-life tyres. Technological review

Authors

  • G. Ramos Centro Nacional de Investigaciones Metalúrgicas (CENIM). CSIC
  • F. J. Alguacil Centro Nacional de Investigaciones Metalúrgicas (CENIM). CSIC
  • F. A. López Centro Nacional de Investigaciones Metalúrgicas (CENIM). CSIC

DOI:

https://doi.org/10.3989/revmetalm.1052

Keywords:

End-of-Life Tyres (ELT), Retread, Material recovery, Energy recovery, Integrated Management System (IMS)

Abstract


In this review, a summary of current legislation applicable to End-of-Life Tyres (ELTs), management of that waste, both in Spain and Europe, and a compilation of existing technologies to enlarge the life of tyres and treatment technologies for material and energy recoveries, are provided. In recent years, there have been a number of studies in the field of treatment of ELTs, therefore applicable emerging technologies as more efficient, clean and costeffective technologies, are discussed.

Downloads

Download data is not yet available.

References

[1] Spanish Law. Real Decreto 1619/2005, de 30 de diciembre, sobre la gestión de neumáticos fuera de uso. BOE, 3/01/2006 nº. 2, p.352.

[2] Spanish Law. Orden MAM/304/2002, de 8 de febrero, por la que se publican las operaciones de valorización y eliminación de residuos y la lista europea de residuos (LER). BOE 19/2/2002, nº. 43, p. 6.494.

[3] J. Martínez, Guía para la gestión integral de residuos peligrosos. Fichas temáticas. Tomo II. Ed. Centro Coordinador del Convenio de Basilea para América Latina y el Caribe, Montevideo, Uruguay, 2005, pp. 21-26.

[4] M.Giannouli, P. de Haan, M.Keller and Z. Samaras, J.Cleaner Prod. 15 (2007) 1169- 1182 http://dx.doi.org/10.1016/j.jclepro.2006.05.031

[5] Juniper Consultancy Services Ltd. Emerging solutions for managing scrap tyres. Tecnology solutions and market opportunities. Sheppards Mill (Ed.), Gloucestershire, England, 2004, pp. 22-23.

[6] Secretariat of Basel Convention, Technical guidelines on the identification and management of used tyres. United Nations Environment Programme (UNEP), 2000, pp. 1-47.

[7] E.Kwon and M.J.Castaldi. Environ.Sci.Technol. 43 (2009) 5996-6002. http://dx.doi.org/10.1021/es900564b

[8] EU. Directiva 2008/98/CE del Parlamento Europeo y del Consejo, de 19 de noviembre de 2008, sobre los residuos y por la que se derogan determinadas Directivas. Diario Oficial, 22/11/2008, nº. L312, p. 3.

[9] Spanish Law. Real Decreto 1481/2001, de 27 de diciembre, por el que se regula la eliminación de residuos mediante depósito en vertedero. BOE, 29/01/2002, nº. 25, p. 3.507.

[10] UE. Directiva 2000/53/CE de 18 de septiembre de 2000 relativa a los vehículos al final de su vida útil. Diario Oficial, 21/10/2000, nº. L269, p. 34.

[11] Spanish Law. Real Decreto 653/2003, de 30 de mayo, sobre incineración de residuos. BOE, 14/06/2003, nº. 142, p. 22.966.

[12] European Tyre & Rubber Manufacturers Association (ETRMA). www.etrma.org

[13] Spanish Law. Resolución de 20 de enero de 2009, de la Secretaría de Estado de Cambio Climático, se aprueba el Plan Nacional Integrado de Residuos para el período 2008- 2015. BOE, 26/02/2009, nº. 49, p. 19.893.

[14] E. Cano, L. Cerezo and M. Urbina, Valorización material y energética de neumáticos fuera de uso. Informe de Vigilancia Tecnológica, Círculo de Innovación de Materiales, Tecnología Aeroespacial y Nanotecnología (CIMTAN) (Ed.),Madrid, Spain, 2006, pp. 1-100.

[15] Silke Krömer, Life Cycle Assessment of a car tyre, Continental AG (Ed.), Hannover, Germany, 2002, pp. 1-44.

[16] N.N. Eldin and A.B. Senouci, J. Mater. Civ. Eng. 5 (1993) 478-496. http://dx.doi.org/10.1061/(ASCE)0899-1561(1993)5:4(478)

[17] D. A. Baeta, J. A. Zattera, M. G. Oliveira and P. J. Oliveira, Braz. J. Chem. Eng. 26 (2009) 23-31. http://dx.doi.org/10.1590/S0104-66322009000100003

[18] World Business Council for Sustainable Development (WBCSD), Managing-End-of-Life Tires, Full report, Washington, EE.UU., 2007, pp.1-18.

[19] Basel Convention, Revised technical guidelines on environmentally sound management of used tyres, UNEP (Ed.), Genova, Italy, 2010, pp. 1-56.

[20] S. Singh, W. Nimmo, B.M. Gibbs and P.T. Williams, Fuel 88 (2009) 2473-2480. http://dx.doi.org/10.1016/j.fuel.2009.02.026

[21] L.H. Chou, C.K. Lu, J.R. Chang and M.T. Lee, Waste Manage.Res. 25 (2007) 68-76. http://dx.doi.org/10.1177/0734242X07067448

[22] J.A. Conesa, A. Gálvez, F. Mateos, I. Martín- Gullón and R. Font, J. Hazard. Mater. 158 (2008) 585-592. http://dx.doi.org/10.1016/j.jhazmat.2008.01.116 PMid:18374482

[23] M.A. Trezza and A.N. Scian, Mater. Res. 2 (2009) 68-76.

[24] M. Zaharia, V. Sahajwalla, B.C. Kim, R. Khanna, N. Saha-Chaudhury, P. O`Kane, J. Dicker, C. Skidmore and D. Knights, Energy Fuels 23 (2009) 2467-2474. http://dx.doi.org/10.1021/ef8010788

[25] L. Zhou, Y. Wang, Q. Huang and J. Cai, Fuel Process. Technol. 87 (2006) 963-969. http://dx.doi.org/10.1016/j.fuproc.2006.07.002

[26] M. H. Joulazadeh, Int. J. ISSI 5 (2008) 36-40.

[27] Tetsuji Mino, Tyre Industry of Japan, JATMA (Ed.),Tokyo, Japan, 2009, pp. 1-32.

[28] J.I. Reisan, Air Emissions from Scrap Tire Combustion, United States Environmental Protection Agency (EPA) (Ed.), Research Paper EPA-600/R-97-115, California, United States, 1997, pp. 1-120.

[29] S. Singh, W. Nimmo, B. M. Gibbs and P. T. Williams, Fuel 88 (2009) 2473-2480. http://dx.doi.org/10.1016/j.fuel.2009.02.026

[30] Centro de Estudios y Experimentación de Obras Públicas (CEDEX), Manual de empleo de caucho de NFU en mez clas bituminosas. Ministerio de Fomento and Ministerio de Medio Ambiente (Ed.), Madrid, Spain, 2007, pp.1-68.

[31] F. Hernandez-Olivares, B. Witoszek-Shultz, M. Alonso-Fernández and C. Benito-Moro, Int. J. Pavement Eng. 10 (2009) 277-288. http://dx.doi.org/10.1080/10298430802169416

[32] I. Gawel and L. Slusarski, Polimery 43 (1998) 280-286.

[33] M. Alexandre-Franco and C.C. Fernandez- Gonzalez, Energy Fuels 24 (2010) 3401-3409. http://dx.doi.org/10.1021/ef901523t

[34] M. Leary, Evaluation of Waste Tire Devulcanization Technologies, CalRecovery Inc. (Ed.) California, EE.UU., 2004, pp. 1-99. (Avaiable on line: http://www.calrecycle.ca.gov Publications/Tires/ 62204008.pdf)

[35] F. A. López, F. J. Alguacil, A. López-Delgado and J. Manso, Situación actual del tratamiento de neumáticos fuera de uso y posibilidades de obtención de negro de humo de alta pureza, Digital CSIC, 2009, 1-25. (Avaiable on line: http://digital.csic.es/handle/10261/17979).

[36] S. Galvagno, S. Casu, T. Casablanca, A. Calabrese and G. Cornacchia, Waste Management 22 (2002) 917-923. http://dx.doi.org/10.1016/S0956-053X(02)00083-1

[37] S. Ucar, S. Karagoz, A. R. Ozkan and J. Yanik, Fuel 84 (2005) 1884-1892. http://dx.doi.org/10.1016/j.fuel.2005.04.002

[38] F.A. López, T.A. Centeno, F.J. Alguacil, B. Lobato, A. López-Delgado and J. Grau Third International Symposium on Energy From Biomass and Waste Venice (Italy), Nov., 2010, IWWG (Ed.), Venice (Italy), pp. 21-39.

[39] M.F. Laresgoiti, B.M. Caballero, I. de Marco, A. Torres, M.A. Cabrero and M.J. Chomón, J. Anal. Appl. Pyrolysis, 79 (2007) 403-408. http://dx.doi.org/10.1016/j.jaap.2006.12.002

[40] M. Olazar, M. Amutio, R. Aguado and J. Bilbao, Energy Fuels 23 (2009) 5423-5431. http://dx.doi.org/10.1021/ef900582k

[41] A. Akbar and M.A. Petrich, AIChE Journal 39 (1993) 1370-1376. http://dx.doi.org/10.1002/aic.690390814

[42] M. Juma, Z. Korenova, J. Markos, L. Jelemensky and M. Bafrnec, Polym. Adv. Technol. 18 (2007) 144-148. http://dx.doi.org/10.1002/pat.811

[43] F.A. López, T.A. Centeno, F.J. Alguacil and B. Lobato, J. Hazard. Mater. 190 (2011) 285- 292. http://dx.doi.org/10.1016/j.jhazmat.2011.03.039 PMid:21493004

[44] Besel S.A., Biomasa: Gasificación, Instituto para la Diversificación y Ahorro de la Energía (IDAE)(Ed.),Madrid, Spain, 2007, pp.1-36.

[45] T. Avelino, Eficiencia y ahorro energético en la industria agroalimentaria mediante gasificacion de biomasa, Guascor Bioenergía (Ed.), Álava, Spain, 2009, pp. 1-11.

[46] N.R. Mitta, S. Ferrel-Nadal, A.M. Lazovic, J.F. Perales, E. Velo and L. Puigjaner, Comput.-Aided Civ. Infrastruct. Eng. 21 (2006) 1771-1776. http://dx.doi.org/10.1016/S1570-7946(06)80304-4

[47] M. Treviño-Coca, Tecnología de gasificación integrada en ciclo combinado GICC. Aplicación real en España: ELCOGAS, Puertollano, ELCOGAS S.A., Club Español de la Energía, 2005, pp. 1-95.

[48] I. Silvestravi it and I. Karali nait1, EREM 1 (2006) 52-60.

Downloads

Published

2011-06-30

How to Cite

Ramos, G., Alguacil, F. J., & López, F. A. (2011). The recycling of end-of-life tyres. Technological review. Revista De Metalurgia, 47(3), 273–284. https://doi.org/10.3989/revmetalm.1052

Issue

Section

Reviews

Most read articles by the same author(s)

1 2 3 4 5 > >>