Vacuum furnace equipment for quantitative determination of trapped gases in castings

Authors

  • J. J. Hernández-Ortega Dept. de Ingeniería de Materiales y Fabricación, ETSII, Universidad Politécnica de Cartagena
  • R. Zamora Dept. de Ingeniería de Materiales y Fabricación, ETSII, Universidad Politécnica de Cartagena
  • F. Faura Dept. de Ingeniería de Materiales y Fabricación, ETSII, Universidad Politécnica de Cartagena
  • J. López Dept. de Ingeniería de Materiales y Fabricación, ETSII, Universidad Politécnica de Cartagena

DOI:

https://doi.org/10.3989/revmetalm.0805

Keywords:

Porosity, Trapped gas, Vacuum furnace, Die casting

Abstract


Parts manufactured with casting processes may trap substantial quantities of gas, which could harm the mechanical properties of the manufactured parts. In this work, a vacuum melting device manufactured to measure trapped gas in castings is described. Adjustment correlations, which accurately calculate trapped gas quantity as a function of the pressure increments measured by the vacuum equipment, are obtained. Finally, as an application of the equipment, we present the results obtained for several parts manufactured using a pressure die casting machine. It is expected that the vacuum melting device will be useful to optimize the operating conditions which reduce the trapped gas in casting processes.

Downloads

Download data is not yet available.

References

[1] ISO 10049, Aluminium Alloy Casting-Visual Method for Assessing the Porosity, 1992.

[2] ASTM E155-00, Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings, ASTM International, 2000.

[3] ASTM E1441-00, Standard Guide for Computed Tomography (CT) Imaging, ASTM, 2005.

[4] S. Palanisamy, R. Nagarajah, y P. Iovenitti, Transactions of the Die Casting in the Heartland, Indianapolis, EE. UU., 2003, Ed. NADCA, paper T03-22.

[5] T.E. Prucha y R. Nath, Proc. SAE World Congress, Detroit EE. UU., 2003, Ed. SAE International, paper 2003-01-0436.

[6] L. Garber y A.B. Draper, Trans. 10th SDCE Int. Die Casting Exposition and Congress, St. Louis, EE. UU., 1979, Ed. NADCA, Paper G-T79- 022.

[7] L. Luis-Martín, T. Rosa y J. Pérez, Rev. Metal. Madrid 15 (1979) 221-234.

[8] J.R. Brevick y P.S. Cheng, Trans. 18th Int. Die Casting Cong. Exp., Indianapolis (USA), 1995, Ed. NADCA, paper T95-045.

[9] K. S. Anastasiou, P. I. Mech. Eng. B-J Eng., 216 (2002) 969-977.

[10] V.D. Tsoukalas, Int. J. Cast. Metal. Res. 15 (2003) 581-588.

[11] R. Zamora, J.J. Hernández-Ortega, F. Faura, J. López y J. Hernández, J. Manuf. Sci. E-T ASME. 130 (2008).

[12] Y.J. Huang, B.H. Hu, I. Pinwill, W. Zhou y D.M.R. Taplin, Mater. Manuf Process. 15 (2000) 97-105. doi:10.1080/10426910008912975

[13] S.T. Mcclain, MS Degree Thesis, Mississippi State University, 1997.

[14] L. Luis y J.I. Robla, Trans. 12th Int. Die Casting Cong. and Exp., Minneapolis, EE. UU., 1983, Ed. NADCA, paper G-T83-052.

[15] J.I. Robla y L. Luis, J. Vac. Sci. Technol. 4 (1987) 2.693-2.695.

[16] L. Luis y J.I. Robla, Trans. 14th Int. Die Casting Congress and Exposition, Toronto (Canada), 1987, Ed. NADCA, paper G-T87-029.

[17] L. Wang, W. Alguine, M. Gershenzon, G. Savage y K. Rogers, Trans. Die Casting in the Heart - land, Indianapolis, EE. UU., 2003, Ed. NADCA, paper T03-048.

[18] R.D. Webb, 1999. Patent Number 55,987,053.

[19] R. Zamora, Tesis doctoral, Escuela Técnica Superior de Ingeniería Industrial, Universidad Politécnica de Cartagena, 2005.

[20] X. Hao, J. Gu, N. Chen, W. Zhang, y X. Zuo, Appl. Therm. Eng. (2007) doi: 10.1016/j.applthermaleng.2007.12.007

[21] Specialty Handbook,1996, Aluminum and Aluminum alloys, ASM International, pp. 199-206.

[22] G. Bar-Meir, J. Eng. Mater-T ASME 117 (1995) 215-219.

[23] R. Zamora, F. Faura, J. López y J. Hérnandez, Int. J. Ad. Manuf. Tech. 33(2007) 266-277. doi:10.1007/s00170-006-0456-z

[24] J. López, J. Hernández, F. Faura y G. Trapaga, J. Fluid. Eng-T ASME, 122(2) (2000) 349-356.

[25] J. López, F. Faura, J. Hernández y P. Gómez, J. Manuf. Sci. E-T ASME 125(3) (2003) 529- 537.

Downloads

Published

2009-02-28

How to Cite

Hernández-Ortega, J. J., Zamora, R., Faura, F., & López, J. (2009). Vacuum furnace equipment for quantitative determination of trapped gases in castings. Revista De Metalurgia, 45(1), 58–69. https://doi.org/10.3989/revmetalm.0805

Issue

Section

Articles