Corrosion behavior of powder metallurgical stainless steels in urban and marine environments

Authors

  • A. Bautista Departamento de Ciencia e Ingeniería de Materiales, Universidad Carlos III de Madrid
  • F. Velasco Departamento de Ciencia e Ingeniería de Materiales, Universidad Carlos III de Madrid
  • S. Guzmán Departamento de Ciencia e Ingeniería de Materiales, Universidad Carlos III de Madrid
  • D. de la Fuente Escuela Técnica Superior de Naútica y Máquinas Navales
  • F. Cayuela Escuela Técnica Superior de Naútica y Máquinas Navales
  • M. Morcillo Centro Nacional de Investigaciones Metalúrgicas (CSIC)

DOI:

https://doi.org/10.3989/revmetalm.2006.v42.i3.17

Keywords:

Corrosion, Stainless steels, Powder metallurgy, Sintering conditions, Marine atmosphere, Urban atmosphere

Abstract


This work studies the development of corrosive attack on sintered components manufactured from AISI 316L and AISI 304L powders. The stainless steels were sintered in vacuum and in nitrogen-base atmosphere at 1,120 and 1,250 ºC, and their corrosion resistance was then analyzed by electrochemical techniques and by atmospheric corrosion testing (two years) at urban and marine test sites. Images are shown of the morphology of the attack on the surface of the stainless steels and the development of this attack in the interior of the material.

Downloads

Download data is not yet available.

References

[1] E. Otero, A. Pardo, E. Sáenz, M. V. Utrilla AND P. Hierro, Corros. Sci. 38 (1996) 1485- 1493. doi:10.1016/0010-938X(96)00039-X

[2] L. Feddrizzi, A. Molinari, F. Deflorian, A. Tiziani AND P. L. Bonora, Br. Corros. J. 26 (1991) 46-50.

[3] E. Angelini, P. Bianco, F. Rosalbino, M. Rosso AND G. Scavino, Werks. Korr. 45 (1994) 392-401. doi:10.1002/maco.19940450705

[4] F. Velasco, J. M. Ruiz-Román, J. M. Torralba AND J. M. Ruiz-Prieto, Br. Corros. J. 31 (1996) 295-299.

[5] L. Fedrizzi, J. Crousier, P. L. Bonora AND J. P. Crousier, Werks. Korr. 42 (1991) 403-409. doi:10.1002/maco.19910420804

[6] F. Velasco, J. M. Torralba, J. M. Ruiz-Román, L. E. García-Cambronero AND J. M. Ruiz-Prieto, Int. J. Powder Metall. 31 (1995) 309-315.

[7] A. Bautista, F. Velasco, M. Campos, M. E. Rabanal AND J. M. Torralba, Oxid. Met. 59 (2003) 373-393. doi:10.1023/A:1023000329514

[8] T. Raghu, S. N. Malhotra AND P. Ramakrishnan, Corrosion 45 (1989) 698-704.

[9] T. Raghu, S. N. Malhotra AND P. Ramakrishnan, Br. Corros. J. 23 (1988) 109-116.

[10] E. Klar AND P. K. Samal, Powder Metals: Corrosion Test and Standards Manual, R. Baboian (Ed.), American Society for Testing and Materials, Philadelphia, USA, 1995, pp. 551- 557.

[11] B. Shaw, Powder Metals Technologies and Applications, Ed. ASM Handbook, vol. 7, ASM International, Materials Park, USA, l998, pp. 978-1005.

[12] F. Velasco, L. F. Tejada, W. M. Lima, R. Marcé, J. A. Bas AND J. M. Torralba, Key Eng. Mater. 189-191 (2001) 346-351.

[13] J. Abenojar, F. Velasco, J. M. Torralba, J. A. Bas, J. A. Calero AND R. Marce, Mater. Sci. Eng. A 335 (2002) 1-5. doi:10.1016/S0921-5093(01)01941-4

[14] J. Abenojar, F. Velasco, A. Bautista, M. Campos, J. A. Bas AND J. M. Torralba, Compos. Sci. Technol. 63 (2003) 69-79. doi:10.1016/S0266-3538(02)00179-3

[15] F. Velasco, J. R. Ibars, J, M. Ruiz-Román, J. M. Torralba AND J. M. Ruiz-Prieto, Corrosion 52 (1996) 47-52.

[16] A. Bautista, F. Velasco, J. Abenojar AND N. Antón, 178th Meeting of the Electrochemical Society, Abstracts vol. 2000-2, Ed. Electrochemical Society, Phoenix, USA, 2000, paper nº 387.

[17] J. A. González, E. Escudero, V. López, J. Simancas AND M. Morcillo, Rev. Metal. Madrid 40 (2004) 259-269.

[18] J. A. González, E. Escudero, V. López, J. Simancas AND M. Morcillo, Rev. Metal. Madrid 40 (2004) 270-279.

[19] A. Pardo, M. C. Merino, J. Botella, V. Matres, F. Viejo, M. Carboneras AND R. Arrabal, Rev. Metal. Madrid 40 (2004) 335-340.

[20] A. Salak, Ferrous Powder Metallurgy, Ed. Cambridge International Science Publishing, Cambridge, UK, 1995, pp. 180-181.

[21] G. Lei, R. German AND H. S. Nayar, Progr. Powder Metall. 39 (1984) 391-410.

Downloads

Published

2006-06-30

How to Cite

Bautista, A., Velasco, F., Guzmán, S., de la Fuente, D., Cayuela, F., & Morcillo, M. (2006). Corrosion behavior of powder metallurgical stainless steels in urban and marine environments. Revista De Metalurgia, 42(3), 175–184. https://doi.org/10.3989/revmetalm.2006.v42.i3.17

Issue

Section

Articles

Most read articles by the same author(s)

1 2 3 4 > >>