Use of flux welding slag of the MnO-Si02 system for the obtaining of a new alloyed agglomerated flux

Authors

  • A. Cruz Centro de Investigaciones de la Soldadura, Universidad Central "Marta Abreu"de las Villas
  • R. Quintana Centro de Investigaciones de la Soldadura, Universidad Central "Marta Abreu"de las Villas
  • LL. García Centro de Investigaciones Metalúrgicas (CIME)
  • L. Perdomo Centro de Investigaciones de la Soldadura, Universidad Central "Marta Abreu"de las Villas
  • G. Jiménez Centro de Investigaciones Siderúrgicas
  • C. R. Gómez Centro de Investigaciones de la Soldadura, Universidad Central "Marta Abreu"de las Villas
  • F. J. Alguacil Centro Nacional de Investigaciones Metalúrgicas (CENIM/CSIC)
  • A. Cores Centro Nacional de Investigaciones Metalúrgicas (CENIM/CSIC)

DOI:

https://doi.org/10.3989/revmetalm.2005.v41.i1.180

Keywords:

Flux, submerged arc welding surfacing, slag, MnO-Si02 system

Abstract


This paper deals with the use of welding slags of the MnO-Si02 system fluxes, coming from the recovering by means of the submerged arc welding in the manufacturing of agglomerated fluxes for surfacing with the same propose. The composition of the matrix is studied by means of an experimental design in a restricted area of the McLean Anderson kind, the technological behaviour of the different mixtures is checked, and the results of the best types that have alloy charges included are analysed by a characterization of the weld.

Downloads

Download data is not yet available.

Downloads

Published

2005-02-28

How to Cite

Cruz, A., Quintana, R., García, L., Perdomo, L., Jiménez, G., Gómez, C. R., Alguacil, F. J., & Cores, A. (2005). Use of flux welding slag of the MnO-Si02 system for the obtaining of a new alloyed agglomerated flux. Revista De Metalurgia, 41(1), 3–11. https://doi.org/10.3989/revmetalm.2005.v41.i1.180

Issue

Section

Articles