Yield stress of fully stabilized zirconia single crystals with a high yttria content
DOI:
https://doi.org/10.3989/revmetalm.2001.v37.i2.485Keywords:
Zirconia, Plastic deformation, High temperature,Abstract
The yield stress of cubic stabilized zirconia single crystals with yttria concentrations between 24 to 32 mol % has been studied for temperatures of 1400 °C by compression experiments on the <112> crystalographic axis at constant compressive strain rate. The yield stress reaches a value of 300 MPa, remaining constant for the higher concentration studied, and being also independent of the annealing time in air. The plastic behavior is discussed in terms of the interaction of dislocations with the free yttrium defects.
Downloads
Download data is not yet available.
Downloads
Published
2001-04-30
How to Cite
Gallardo, A., Gómez, D., Martínez-Fernández, J., & Domínguez-Rodríguez, A. (2001). Yield stress of fully stabilized zirconia single crystals with a high yttria content. Revista De Metalurgia, 37(2), 299–302. https://doi.org/10.3989/revmetalm.2001.v37.i2.485
Issue
Section
Articles
License
Copyright (c) 2001 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
