Surface engineering and environmental issues

Authors

  • A. Agüero Instituto Nacional de Técnica Aeroespacial, Área de Materiales Metálicos

DOI:

https://doi.org/10.3989/revmetalm.2007.v43.i1.53

Keywords:

Surface modification, Environmental impact, Coatings, Industrial applications

Abstract


Surface engineering addresses the modification of the microstructure and/or composition of the surface of components by mechanical, physical or chemical methods that may imply adding a material in order to change the surface properties of said component. One of its most important consequences is the significant increase of the useful life of a variety of components in a large number of industrial applications. Moreover, it contributes to energy savings by increasing efficiencies as it allows higher combustion temperatures, by allowing the use of lighter components and by significant friction reduction. In this paper, surface engineering is introduced, as well as its different modalities, examples of industrial applications and positive and negative environmental impacts.

Downloads

Download data is not yet available.

References

[1] ASM Handbook, Surface Engineering, V 5, ASM International, Materials Park, Ohio, EE.UU., 1994, pp. 126-135.

[2] K.G. Budinski, Surface Engineering for Wear Resistance, Prentice Hall, 1988, pp. 120-137.

[3] ASM Handbook, Lubrication and Wear Technology, V 18, ASM International, Materials Park, Ohio, EE.UU., 1992, pp. 861-872.

[4] V. Amigó, Y. Pineda, F. Segovia y A. Vicente, Rev. Metal. Madrid 40 (2004) 403-408.

[5] J.R. Davies, Surface Engineering for Corrosion and Wear Resistance, ASM International, Materials Park, Ohio, EE.UU., 2001, pp. 112-116.

[6] R. Bianco y R.A. Rapp, Metallurgical and Ceramic Coatings, Ed. K.H. Stern, Chapman and Hall, Glasgow, England, 1996, pp. 236-263.

[7] M.F. Stroosnijder e I.F. Norton, Surf. Interf. Anal. 22 (1994) 436-440. doi:10.1002/sia.740220193

[8] ASM Handbook, Surface Engineering, V 5, ASM International, Materials Park, Ohio, EE.UU., 1994, pp. 378-411 y 482-493.

[9] E. Escudero, M.J. Bartolomé, V. López, J. Simancas, J.A. González, M. Morcillo y E. Otero, Rev. Metal.Madrid 41 (2005) 133-138.

[10] J.W. Dini, Electrodeposition: The Materials Science of Coatings and Substrates, Noyes, (1993)

[11] G. O. Mallory y J.B. Haidu, Electroless Plating: Fundamentals and Applications, American Electroplaters and Surface Finishers Society, INC., EE.UU., 1990.

[12] A.R. Marder, Prog. Mater. Sci. 45 (2000) 191-275. doi:10.1016/S0079-6425(98)00006-1

[13] H.E. Towsens, L. Allegra, R.J. Dutton y S.A. Kriner, Mater. Perform. (1986) 36- 46.

[14] D. Mattox, Handbook of Physical Vapour Deposition Processing (PVD), Lattice Press, Sunset Beach, CA, EE. UU., 1998.

[15] K.L. Choy, Prog. Mater. Sci. 48 (2003) 57-170. doi:10.1016/S0079-6425(01)00009-3

[16] M.R. Dorfman, Ad. Mater. Proces. 160 (2002) 66-68.

[17] L.J. Li y J. Mazumder, Laser Processing of Materials, Eds. K. Mukherjee y J. Mazumder, The Metallurgical Society of AIME, Warrendale, PA, EE.UU., 1985, p. 35.

[18] G.P. Rodríguez, M. Checa y J.J. De Damborenea, Rev. Metal. Madrid Vol. Extr. (2005) 513-517.

[19] S. Grainger, Engineering Coatings, Design and Applications, Abington Publishing, 1989, p. 33.

[20] J. Bentley Y G.P.A. Turner, Química y tecnología de pinturas y revestimientos, A. Madrid Vicente Ediciones, Madrid, España, 1999.

[21] J.D. Gad, J.F. Nejedlik y L. D. Graham, Electrochem. Technol. 6 (1968) 307-315.

[22] J.R. DavueS, High Temperature Coatings for Superalloys, ASM Specialty Handbook: Nickel, Cobalt and their Alloys, ASM international, Materials Park, Ohio, EE.UU., 2000, pp. 281-290.

[23] P.A. Dearnley, J. Eng. Med. 213 (1999) 107-135. doi:10.1243/0954411991534843

[24] E. Peón, A. Jiménez-Morales, E. Fernándezescalante, M.C. García-Alonso, M.L. Escudero Y J.C. Galván Rev. Metal. Madrid Vol. Extr. (2005) 479-482.

[25] G. Barbezat, Int. J. Automot. Technol. 2 (2001) 47-52.

[26] Hot Deep Galvanizing for Corrosion Protection of Steel Products, American Galvanizers Association (1989)

[27] I. Kleiman y Z. A. Iskanderova, Proc. 8th Int. Symp. Mat, in a Space Environment and 5th Internat. Conf. Protection Materials Structures LEO Space Environment, ESA, (2000).

[28] R. Hauert, J. Patscheider, Ad. Eng. Mater. 2 (2000) 247-259. doi:10.1002/(SICI)1527-2648(200005)2:5<247::AID-ADEM247>3.0.CO;2-U

[29] M. Kupckyk y W. Misiak, Rev. Metal. Madrid Vol. Extr. (2005) 483-487.

Downloads

Published

2007-02-28

How to Cite

Agüero, A. (2007). Surface engineering and environmental issues. Revista De Metalurgia, 43(1), 63–75. https://doi.org/10.3989/revmetalm.2007.v43.i1.53

Issue

Section

Reviews