Behaviour of AISI-SAE 8615 steel in ferritic nitrocarburizing using urea-metanol
DOI:
https://doi.org/10.3989/revmetalm.1998.v34.i3.792Keywords:
Steel, Thermochemical treatments, Nitrocarburizing, Urea-MethanolAbstract
The present work shows the behaviour of low carbon alloyed steels as AISI-SAE 8615, after a ferritic nitrocarburizing process. Nitrocarburizing takes place at 570ºC for 3 h in an atmosphere by combustion of methanol and urea under different flow rates. Metallographic studies were performed by optical microscopy. Hardness profiles were measured and carbon percentages were also analized by emission spectrometry in order to determine the extension of the nitrocarburizing process. Optimal flow conditions have been found. The influence of the flow rate on the nitrocarburizing layer thickness has been also studied.
Downloads
Download data is not yet available.
Downloads
Published
1998-06-30
How to Cite
Barrena, M. I., & Castro, A. (1998). Behaviour of AISI-SAE 8615 steel in ferritic nitrocarburizing using urea-metanol. Revista De Metalurgia, 34(3), 261–267. https://doi.org/10.3989/revmetalm.1998.v34.i3.792
Issue
Section
NO_SECCION_SI_RESUMEN
License
Copyright (c) 1998 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.