Acoustic emission study on flexural behaviour of WC-Co coatings obtained by atmospheric plasma spray

Authors

  • F. Segovia Instituto de Tecnología de Materiales ITM. Universidad Politécnica de Valencia
  • E. Klyatskina Instituto de Tecnología de Materiales ITM. Universidad Politécnica de Valencia
  • V. Bonache Instituto de Tecnología de Materiales ITM. Universidad Politécnica de Valencia
  • M. D. Salvador Instituto de Tecnología de Materiales ITM. Universidad Politécnica de Valencia
  • E. Sanchez Instituto de Tecnología Cerámica ITC. Universidad Jaime I
  • V. Cantavella Instituto de Tecnología Cerámica ITC. Universidad Jaime I
  • C. Bloem Departamento de Tecnología y Diseño. Facultad de Ingeniería. Universidad de los Andes

DOI:

https://doi.org/10.3989/revmetalm.2007.v43.i6.84

Keywords:

Plasma spray coating, Nanomaterials, Cermet, Acoustic emissión, Fracture

Abstract


Plasma sprayed cermet coatings WC-Co are used in a wide range of industrial applications, mainly due to their wear resistance even in corrosive environments. The objective of this work is to analyze mechanical response of hard metal coatings by means of three- and four-points bend tests applying acoustic emission technique to determine failure critical strength. It has been observed the effect of supported charge level in structural damage by means of optical microscopy and scanning electron microscopy. Acoustic emission has allowed us to relate damage level to stresses level and then to understand coatings failure mechanism.

Downloads

Download data is not yet available.

References

[1] J.M. Miguel, J.M. Guilemany, B.G. Mellor Y Y.M. Xu, Mater. Sci. Eng. A352 (2003) 55-63. doi:10.1016/S0921-5093(02)00546-4

[2] D. Dalmas, S. Benmedakhene, C. Richard, A. Laksimi, G. Béranger Y T. Grégoire, Chim. Chem. 4 (2001) 345–350.

[3] C. Verdon, A. Karimi y J.L. Martin, Mater. Sci. Eng. A246 (1998) 11-24. doi:10.1016/S0921-5093(97)00759-4

[4] V. Higuera, F.J. Belzunce y S. Poveda, Rev. Metal. Madrid 40 (2004) 347-351.

[5] F.J. Belzunce, V. Higuera, y S. Poveda, Bol. Soc. Esp. Ceram. Vidrio 39 (2000) 333-336.

[6] M. Watanabe, A. Owada, S. Kuroda y Y. Gotoh, Surf. Coat. Technol. 201 (2006) 619-627. doi:10.1016/j.surfcoat.2005.12.019

[7] E. Celik, O. Culha, B. Uyulgan, N.F. Akazem, I. Ozdemir y A. Turk, Surf. Coat. Tech. 200 (2006) 4.320-4.328.

[8] J.M. Guilemany, S. Dosta y J.R. MigueL, Surf. Coat. Technol. 201 (2006) 1.180-1.190.

[9] J.A. Picas, A. Forn, R. Rilla Y E. Martin, Surf. Coat. Technol. 200 (2005) 1.178-1.181.

[10] J.A. Picas, A. Forn, R. Rilla y E. Martin, Rev. Metal. Madrid Vol. Extr. (2005) 197-201.

[11] G. Xie, X. Lin, K. Wang, X. Mo, D. Zhang y P. Lin, Corros. Sci. (2006) In press. doi:10.1016/j.corsci.2006.04.007

[12] Z.G. Ban y L.L. Shaw, Acta Mater. 49 (2001) 2.933-2.939.

[13] J. He y J.M. Schoenung, Mater. Sci. Eng. A336 (2002) 274–319. doi:10.1016/S0921-5093(01)01986-4

[14] A. Roques, M. Browne, J. Thompson, C. Rowland y A. Taylor, Biomater. 25 (2004) 769-778. doi:10.1016/S0142-9612(03)00581-7

PMid:14609665

[15] N.A. Semashenko, V.I. Shport, B.N. Marin, A.I. Pekarsh, V.I. Muravie y A.I. Evstigneev, Akysticheskaya Emissiya V Eksperimentalnom Materialovedenii, Ed. Mashinostroenie, Moscú, Rusia, 2002, pp. 9-16.

[16] E. Sánchez, V. Cantavella, M.D. Salvador, V. Bonache, V. Amigó, N. Valero y F. Sapiña, Actas IX Cong. Nac. Materiales, vol. 2, Vigo, España, 2006, p.1.199.

[17] P. Bansal, P. H. Shipway, S. B. Leen y L.C. Driver, Mater. Sci. Eng. A, 430 (2006) 104-112. doi:10.1016/j.msea.2006.05.139

[18] V. Higuera, F.J. Belzunce y J. RIBA, Rev. Metal. Madrid 42 (2006) 444-445.

[19] D. Tu, S. Chang, S. Chao y C. Lin, J. Vac. Sci. Technol. A3 (6) (2003) 2479-2482. doi:10.1116/1.572862

[20] Y. C. Zhu, C. X. Ding y P. Strutt, Ceram. Int. 27 (2001) 669-674. doi:10.1016/S0272-8842(01)00016-5

[21] M.F. Morks, Y. Gao, N.F. Fahim, F.U. Yingqing y M.A. Shoeib, Surf. Coat. Technol. 199 (2005) 66-71. doi:10.1016/j.surfcoat.2005.02.159

[22] M.E. Vinayo, F. Kassabji y J. Guyonne, J. Vac. Sci. Technol. A 3 (1985) 2.483-2.489.

[23] H. Li, K.A. Khor, L.G. Yu y P. Chang, Surf. Coat. Technol. 194 (2005) 96-102. doi:10.1016/j.surfcoat.2004.04.075

[24] J. He y J.M., Schoenung, Surf. Coat. Technol. 157 (2002) 72-79. doi:10.1016/S0257-8972(02)00141-X

[25] J.M. Guillemany, J. Nin, C. Lorenzana, J.M. Miguel Y J.R. Miguel, Bol. Soc. Ceram. Vidrio (2004) 483-487.

[26] M.P. Planche, H. Liao, B. Normand y C. Coddet, Surf. Coat. Technol. 200 (2005) 2.465-2.473.

[27] J.M. Guillemany, S. Dosta, J. Nin y J.R. Miguel, J. Thermal Spray Technol. 14 (2004) 405-413.

[28] Z.G. Ban y L.L. Shaw, J. Thermal Spray Technol. 12-1 (2003) 112-119.

[29] C.S. Richard, G. Beranger, J. Lu, J.F. Flavenot And T. Gregoire, Surf. Coat. Technol. 78 (1996) 284-294. doi:10.1016/0257-8972(95)02416-6

Downloads

Published

2007-12-30

How to Cite

Segovia, F., Klyatskina, E., Bonache, V., Salvador, M. D., Sanchez, E., Cantavella, V., & Bloem, C. (2007). Acoustic emission study on flexural behaviour of WC-Co coatings obtained by atmospheric plasma spray. Revista De Metalurgia, 43(6), 414–423. https://doi.org/10.3989/revmetalm.2007.v43.i6.84

Issue

Section

Articles

Most read articles by the same author(s)

1 2 > >>