High performance low alloy steels: Up date

Authors

  • M. Campos Carlos III University, Department of Materials Science and Engineering
  • L. Blanco Carlos III University, Department of Materials Science and Engineering - Saintgobain Glass Solar Control S.L.
  • J. Sicre-Artalejo Carlos III University, Department of Materials Science and Engineering
  • J. M. Torralba Carlos III University, Department of Materials Science and Engineering

DOI:

https://doi.org/10.3989/revmetalm.2008.v44.i1.90

Keywords:

Powder metallurgy, Chromium and molybdenum steels, Manganese, High density systems

Abstract


A highly demanding automobile market requires an intensification of the efforts on increasing the performance and reducing costs of sintered steels, in order to stay in such a competitive market. Final properties of sintered parts and their cost depend on two main factors, density and the alloying system. The growing interest for Cr and Mn as alloying elements is due to both price, more suitable than Mo, and the excellent level of properties which are achieved in assintered parts as well as after the heat treatments. In this work, the possible techniques which lead to an enhancement of density are discussed, such as warm and high velocity compaction, or high temperature sintering; moreover it is important to study the synergy between the proposed techniques which may be compatible.

Downloads

Download data is not yet available.

References

[1] D. Whittaker. Metal Powder Report. 54 (1999) 14-21. doi:10.1016/S0026-0657(00)86723-5

[2] P.K. Johnson, Int. J. Powder Metall. 26 (1990) 57-61.

[3] P. Lindskog, Powder Metall. 47 (2004) 6-9.

[4] H. Danninger, Mater. Sci. Forum 426 (2003) 115-122

[5] ASM Handbook, Vol. 7, Ed. ASM International, Material Park, OH, EE.UU., 1998, pp. 2.012-2.015.

[6] S. Berg, Proc. PM2Tech 2001, Part V, Ed. Princenton: Metal Powder Industries Federation, Nueva Orleans, EE.UU., 2001, pp. 130-137.

[7] H. Danninger, R. Pottschacher, S. Bradac, A. Salak y J. Seyrkammer, Powder Metall. 48 (2005) 23-32. doi:10.1179/003258905X37567

[8] H. Danninger, S. Kremel, A. Molinari, T. Marcu Puscas, J.M. Torralba, M. Campos E y. Yu, Proc. EuroPM2001, Powder Metallurgy Congress and Exhibition, Vol. 1, Ed. The European Powder Metallurgy Association, Niza, Francia, 2001, pp. 28-33.

[9] L. Arnberg, y A. Karlsson, Int. J. Powder Metall. 24 (1988) 107-112.

[10] B. Hu, A. Klenkovkin, S. Berg y R. Young, Proc. PM2Tech 2003 Part V, Ed. Princenton: Metal Powder Industries Federation, Nueva Orleans, EE.UU., 2003, pp. 108-119.

[11] S, Kremel, C. Raab y H. Danninger, Proc. EuroPM2001, Powder Metallurgy Congress and Exhibition, Vol. 1, Ed. The European Powder Metallurgy Association, Niza, Francia, 2001, pp. 52-57.

[12] A. Molinarii, B. Tesi, T. Bacci y T. Marcu, Surf. Coating Tech. 140 (2001) 251-255. doi:10.1016/S0257-8972(01)01040-4

[13] O. Bergman, Proc. EuroPM01, Powder Metallurgy Congress and Exhibition,Vol. 1, Niza, Francia, Ed: The European Powder Metallurgy Association, 2001, pp. 64-69.

[14] N. Candela, R. Plaza, D. Ruiz-Amador, F. Velasco y J.M. Torralba, Rev. Metal. Madrid 37 (2001) 115-118.

[15] H. Karlsson y L. Nyborg, Powder Metall. 48 (2005) 51-58. doi:10.1179/0032589005X37675

[16] C. Lindberg, Proc. PM2TEC’99, Vol. 2, Part 7, Vancouver, Canada, Ed. Princeton: Metal Powder Industries Federation, 1999, pp. 155-163.

[17] Y. Yu, Proc. 2000 PM World Congress & Exhibition, Part. 2, Kyoto, Japón, K. Kosuge and H. Nagai (Eds), The Japan Society of Powder and Powder Metallurgy (2000) pp. 911-915.

[18] F.A. Corpas, J.M. Ruiz-Roman, S. Codina y F.J. Iglesias, Rev. Metal. Madrid 41 (2005) 83-89.

[19] E. Gordo, N. Khattab y J.M. Torralba. Rev. Metal. Madrid Vol. Extr (2005) 95-100.

[20] H. Danninger and C. Gierl, Mater. Chem. Phys. 67 (2001) 49-55. doi:10.1016/S0254-0584(00)00419-3

[21] P. Ortiz y F. Castro, Mater. Sci. Forum 426 (2003) 4.337-4.342.

[22] P. Ortiz y F. Castro, Powder Metall. 47 (2004) 291-298. doi:10.1179/003258904225020747

[23] M. Campos, L. Blanco y J.M. Torralba, J. Therm. Anal. Calorim. 84 (2006) 483-487. doi:10.1007/s10973-005-6991-2

[24] H. Sanderow y H. Rodrigues, Metal Powder Report. 41 (1986) 426-427 .

[25] Anónimo, Metal Powder Report. 41 (1986) 468.

[26] M. Ichidate, Horizons of Powder Metall. (1986) 57-60.

[27] Karasuno, Horizons of Powder Metall. (1986) 53-56.

[28] Sumitomo Metals Ldt. Metal Powder Report. 40 (1985) 235-237.

[29] Anónimo, Metal Powder Report. 59 (2004) 26-27.

[30] A.G. Dowson, Metal Powder Report. 54 (1999) 15-17. doi:10.1016/S0026-0657(99)80162-3

[31] Anónimo, Metal Powder Report. 41 (1986) 413.

[32] A. Salak, Powder Metall. Int. 12 (1980) pp. 28-31.

[33] A. Salak, Powder Metall. Int. 12 (1980) 72-75.

[34] A. Salak, Parktische Metallographie. 22 (1985) 26-33.

[35] A. Salak, L. Parilak, M. Selecka y R. Keresti, Proc. PM2000,World Congress & Exhibition, Part. 2, Kyoto, Japón, K. Kosuge and H. Nagai (Eds), The Japan Society of Powder and Powder Metallurgy, 2000, pp. 9-16.

[36] M. Campos y D. Sanchez, J.Mater.Process. Tech. 143-144 C (2003) 464-469. doi:10.1016/S0924-0136(03)00459-X

[37] M. Campos, S. Kremel, T. Marcu Puscas, Y. Yu, D. Sanchez y J.M. Torralba, Mater. Sci. Forum. 416-418 (2003) 82-88.

[38] J. Sicre-Artalejo, M. Campos, T. Marcu y J.M. Torralba, Mater. Sci Forum. 534-536 (2007) 697-700.

[39] Anónimo, Metal Powder Report. 47 (1992) 28-30.

[40] J. Tengzelius y C.A. Blande, Powder Metall Int. 16 (1984) 133-137.

[41] L. Chaman, Reviews in Particulate Materials. 1 (1993) 75-105.

[42] Piotrowski y G. Biallas, Powder Metall. 41 (1998) 109-114.

[43] D.H. Herring, Metal Powder Report. 50 (1995) 26-31.

[44] K. Shimada, Metal Powder Report. 47 (1992) 24-26. doi:10.1016/0026-0657(92)91996-W

[45] K.H. Lindner and C.M. Sonsino, Metal Powder Report. 49 (1994) 30-36.

[46] V. Macec, Proc. RoPM’96, Romania Int. Conf. Powder Metallurgy, Cluj-Napoca Rumania, Ed. Romanian Powder Metallurgy Society, 1996, pp. 395-398.

[47] Arnhold, K. Dollmeier, V. Kruzhanov Y R. Lindenau, Proc. PM 2004, World Congress and Exhibition, Vol. 1, Viena, Austria, R. Ratzi, H. Danninger (Eds.) European Powder Metallurgy Association, 2004, pp. 558-563.

[48] U. Engstrom, Proc. Powder Metallurgy World Congress and Exhibition, Paris, Francia, Ed. The European Powder Metallurgy Association, 1994, pp. 57-64.

[49] J.M. Capus, Metal Powder Report. 50-7/8 (1995) 30-31.

[50] Anónimo, Metal Powder Report. 50 (1995) 7.

[51] U. Engström Y B. Johansson, Proc. PM2000, World Congress and Exhibition, Part 1, Kyoto, Japón, K. Kosuge and H. Nagai (Eds). The Japan Society of Powder and Powder Metallurgy, 2000, pp. 536-539.

[52] J.M. Capus, Metal Powder Report. 51 (1996) 17-21. doi:10.1016/S0026-0657(99)80625-0

[53] P. Skoglund, S. Bengtsson, Powder Metall. 55 (2001) 358-360.

[54] C.M. Sonsino Y R. Ratzi, Powder Metall. 47 (2005) 352-357. doi:10.1179/003258904X14491

[55] T. Marcu, A. Molinari, G. Straffelini y S. Berg, Powder Metall. 48 (2005) 139-145. doi:10.1179/003258905X37701

[56] O. Andersson, H. Thordenberg y S. Berg, Proc. PM2004, World Congress and Exhibition, Vol. 2, Viena, Austria, R. Ratzi, H. Danninger (Eds.) European Powder Metallurgy Association, 2004, pp. 353-358.

[57] M. Campos y J.M. Torralba, Surf. Coat. Technol. 182 (2003) 351-362. doi:10.1016/j.surfcoat.2003.07.007

[58] Bergmark, O. Bergman y L. Alzati, Proc. PM2Tech 2004, Vol. 2, Part 7, Chicago, EE.UU., Ed. Princeton: Metal Powder Industries Federation, 2004, pp. 75-83.

[59] P. Skoglund, Proc. Int. Conf. Power Transmission Components, Michigan, USA, Walter D. Badger and Howard I. Sanderow (Eds.), Metal Powder Industries Federation, 2001, pp. 15 22.

[60] P. Skoglund, Powder Metall. 44 (2001) 199- 201.

[61] P. Skoglund, M. Kejzelman y I. Hauer, Proc. PM2Tech 2002, World Congress on Powder Metallurgy & Particulate Materials, Vol 4., Orlando, EE. UU., Ed. Metal Powder Industries Federation, 2004, pp. 85-95.

[62] K.S. Baird y J.D. Williams, Int. J. Powder Metall. Powder Tech. 20 (1984) 23-32.

[63] K.S. Baird y J.D. Williams, Powder Metall. 30 (1987) 281-285.

[64] O. Andersson, Proc. PM2TEC 2002, World Congress on Powder Metallurgy & Particulate Materials, Vol. 14, Orlando, EEUU, Ed. Metal Powder Industries Federation Orlando, EEUU, 2002, pp. 61-72.

[65] Aslund, Proc. PM 2004, World Congress and Exhibition, Vol. 1, Viena, Austria, R. Ratzi, H. Danninger (Eds.) European Powder Metallurgy Association, 2004, pp. 553-557.

[66] J.H. Tweed, L. Federzoni y W. Rau, Powder Metall. 45 (2002) 335-344. doi:10.1179/003258902225007078

[67] G. Hinzmann, D. Sterkenburg, Proc. PM 2004, World Congress and Exhibition, Vol. 1, Viena, Austria, R. Ratzi, H. Danninger (Eds.) European Powder Metallurgy Association, 2004, pp. 541-545.

[68] S. Dizdar, P. Skoglund y S. Bengtsson, Proc. PM2Tech2003, Part 9, Las Vegas, EE.UU., Ed Princeton: Metal Powder Industries Federation, 2003, pp 41-50.

[69] I. Hauer, M. Larsson y U. Engström, Proc. PM2TEC 2002, World Congress on Powder Metallurgy & Particulate Materials, Vol. 8, Orlando, EE.UU., Ed. Metal Powder Industries Federation, 2002, pp. 29-37.

[70] A. Molinari, G. Straffelini And P. Campestrini, Powder Metall. 42 (1999) 134-241.

Downloads

Published

2008-02-28

How to Cite

Campos, M., Blanco, L., Sicre-Artalejo, J., & Torralba, J. M. (2008). High performance low alloy steels: Up date. Revista De Metalurgia, 44(1), 5–12. https://doi.org/10.3989/revmetalm.2008.v44.i1.90

Issue

Section

Articles

Most read articles by the same author(s)

1 2 > >>