Evaluation of the effect of Ni-P coating on the corrosion resistance of the aluminium 7075 T6 alloy

Authors

  • L. Gil Departamento de Ingeniería Metalúrgica, Universidad Nacional Experimental Politécnica (UNEXPO)
  • L. Jiménez Departamento de Ingeniería Metalúrgica, Universidad Nacional Experimental Politécnica (UNEXPO)
  • A. C. Castro Escuela de Ingeniería Metalúrgica y Ciencia de los Materiales, Facultad de Ingeniería, Universidad Central de Venezuela
  • M. H. Staia Escuela de Ingeniería Metalúrgica y Ciencia de los Materiales, Facultad de Ingeniería, Universidad Central de Venezuela
  • E. S. Puchi-Cabrera Escuela de Ingeniería Metalúrgica y Ciencia de los Materiales, Facultad de Ingeniería, Universidad Central de Venezuela

DOI:

https://doi.org/10.3989/revmetalm.2008.v44.i1.96

Keywords:

Aluminum 7075 T6, Electroless Ni-P, Corrosion, Exfoliation, Pitting

Abstract


The aluminum alloy 7075-T6 is a structural alloy widely used for aeronautical applications due to its high relationship between mechanical resistance and weight. Depending upon the environmental conditions, many types of corrosion mechanisms such as intergranular, exfoliation, have been found to occur in aircraft structural aluminum alloys. A significant advance in order to improve the behavior of this alloy is related to the application of the autocatalytic Ni-P coating which confers an excellent corrosion resistance coupled with both reduced erosive wear and higher hardness. The purpose of this work was to investigate the effect of the application of a Ni-P coating on the corrosion resistance of an aluminum 7075-T6 alloy. The results obtained indicated that the application of the Ni-P coatings diminishes the susceptibility to pitting and makes the aluminum 7075 T6 alloy immune to the exfoliation corrosion attack.

Downloads

Download data is not yet available.

References

[1] R. Bucci and C. Warren, J. Aircr. 37 (2000) 122-129.

[2] J. Badía, J. Antoranz, P. Tarín, A. Simón and N. M. Piris, Rev. Metal. Madrid 40 (2004) 436-442

[3] E. Stansbury and R. Buchanan, Fundamentals of Electrochemical Corrosion, Ed. ASM International, 1th edition, Materials Park, Ohio, USA, 2000, pp. 297-305.

[4] C. Dervos, P. Vassiliou and J. Novakovic, Rev. Metal. Madrid 41 (2005) 232-239.

[5] R. Zeller III, Corrosion 47 (1991) 692-702.

[6] T. Mimani and S. Mayanna, Surf. Coat. Technol. 79 (1996) 246-251. doi:10.1016/0257-8972(95)02446-8

[7] P. Lo, W. Tsai, J. Lee and M. Hung, Surf. Coat. Technol. 67 (1994) 27-34. doi:10.1016/S0257-8972(05)80023-4

[8] N. Martyak, S. Wetterer, L. Harrison, M. Mcneil, R.Heu and A. Albert Neiderer, Plat. Surf. Finish 6 (1993) 60-64.

[9] G. Lu and G. Zangari, Electrochim. Acta 47 (2002) 2969-2979. doi:10.1016/S0013-4686(02)00198-6

[10] R. Raicheff and V. Zaprianova, J. Mater. Sci. Lett. 19 (2000) 3-5. doi:10.1023/A:1006775025613

[11] P. Bai, Y. Chuang and C. Hu, Mater. Chem. Phys. 82 (2003) 93-100. doi:10.1016/S0254-0584(03)00193-7

[12] S. Lee and H. Liang, Plat. Surf. Finish. 78 (1991) 82-86.

[13] K. Aoki and O. Takano, Plat. Surf. Finish. 73 (1986) 136-141.

[14] R. Diegle, N. Sorensen, C. Clayton, M. Helfand and Y. Yu, J. Electrochem. Soc. 135 (1988) 1085-1092. doi:10.1149/1.2095880

[15] Y. Okamato, Y. Nitta, T. Imanaka and S. Teranishi, J. Catal. 64 (1980) 397-404. doi:10.1016/0021-9517(80)90512-6

[16] E. Van Der Kouwe, Electrochim. Acta 38 (1993) 2093-2097. doi:10.1016/0013-4686(93)80345-Z

[17] ASTM 661-686, Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron, Nickel, or Cobalt-Based Alloys, ASTM, 1988, West Conshohocken, PA, USA.

[18] ASTM 634-672, Exfoliation Corrosion Susceptibility in 7XXX Series Copper-Containing Aluminum Alloys (EXCO Test), ASTM, 1972, West Conshohocken, PA. USA.

[19] Z. Longfei, L. Shufu and L. Pengxing, Surf. Coat. Techn. 36 (1988) 455-462. doi:10.1016/0257-8972(88)90173-9

[20] J. Carbajal and R. WhitE, J. Electrochem. Soc. 135 (1988) 2952-2957. doi:10.1149/1.2095468

[21] H. Ashassi–Sorkhabi and S. Rafizadeh, Surf. Coat. Technol. 176 (2004) 318-326. doi:10.1016/S0257-8972(03)00746-1

[22] J. Flis and D. Duquette, Corrosion 28 (1972) 321-330.

[23] R. Baboian, Electrochemical Techniques for Corrosion Engineering, Ed. NACE, Houston, TX, USA, 1986.

[24] R. Zeller Iii and R. Salvati, Corrosion 50 (1994) 457-467.

Downloads

Published

2008-02-28

How to Cite

Gil, L., Jiménez, L., Castro, A. C., Staia, M. H., & Puchi-Cabrera, E. S. (2008). Evaluation of the effect of Ni-P coating on the corrosion resistance of the aluminium 7075 T6 alloy. Revista De Metalurgia, 44(1), 66–73. https://doi.org/10.3989/revmetalm.2008.v44.i1.96

Issue

Section

Articles