New model for the prediction of the final microstructure and the dynamic recrystallization parameters of polycrystalline metallic materials. Application to AZ31 magnesium alloy

Authors

  • I. Rieiro Dpto. Matemáticas, Universidad de Castilla-La Mancha
  • M. T. Larrea CENIM-CSIC
  • V. Gutiérrez Dpto. Matemáticas, Universidad de Castilla-La Mancha
  • V. Triviño Dpto. Matemáticas, Universidad de Castilla-La Mancha
  • M. Carsí CENIM-CSIC
  • O. A. Ruano CENIM-CSIC

DOI:

https://doi.org/10.3989/revmetalmadrid.12XIIPMS

Keywords:

Modelization, Plastic flow, Dynamic recrystallization, Magnesium alloys

Abstract


The study starts from a new constitutive equation able to reproduce the stress-strain curves for each strain rate and temperature. Using this equation, the characteristic parameters of dynamic recrystallization for each of the flow curves can be obtained. An experimental study of final grain sizes, their frequency and distribution and area fractions has been made. These parameters together with those mentioned above allow establishing predictive models for the final microstructure conditions of polycrystalline metallic materials. These models have been applied to the hot deformation of AZ31 magnesium alloy. Mean final grain sizes, area fraction distributions and their frequency are predicted. In addition, the characteristic dynamic recrystallization parameters of the material that constitute elements of control of the deformation process are also predicted.

Downloads

Download data is not yet available.

References

[1] I. Rieiro, V. Gutiérrez, J. Castellanos,M. Carsí, M. T. Larrea y O.A. Ruano, Metal. Mater. Trans. A 41 (2010) 2.396- 2.407.

[2] I. Rieiro, M. Carsí y O.A. Ruano, Mater. Sci. Technol. 25 (2009) 995-1.002.

[3] J. Castellanos, I. Rieiro, M. El Mehtedi, M. Carsí y O.A. Ruano, Int. J. Mat. Res. 101 (2010) 787-793.

[4] V. Gutierrez, Tesis deMaestría, Universidad de Castilla La Mancha, 2009.

[5] I. Rieiro, J. Castellanos, M. Carsí, J. Muñoz, M.T. Larrea, V. Amigó y O.A. Ruano, Act. XI Cong. Nac. Tratamientos Térmicos y de Superficie, Tratermat 2008, Valencia, UPV, Valencia, España, 2008, pp.175-178.

[6] I. Rieiro, J. Castellanos, M. Carsí, D. Martín, M.T. Larrea y O. A. Ruano, Rev. Latinoam. Metal. Mater. 2 (2009) 725-734.

[7] J. Castellanos, I. Rieiro, J. Muñoz, M. Carsí y O.A. Ruano, Resúmenes XI Cong. Nac. Propiedades Mecánicas de Sólidos, El Bosque, Cádiz, España, 2008, Univ. De Cádiz, 2008, pp. 89-90.

[8] E.I Poliak y J.J. Jonas, Acta Mater. 44 (1996) 127-136. doi:10.1016/1359-6454(95)00146-7

[9] A. Galiyev, R. Kaibyshev y G. Gottstein, Acta Mater. 49 (2001) 1.199-1.207.

[10] H.J. McQueen y C.A.C. Imbert, J. Alloys Compd. 378 (2004) 35-43. doi:10.1016/j.jallcom.2003.10.067

[11] I. Rieiro, J. Castellanos, M. Carsí, J. Muñoz y O.A. Ruano,Mater. Sci. Forum 604-605 (2009) 87-96. doi:10.4028/www.scientific.net/MSF.604-605.87

[12] I. Rieiro, M. Larrea, J. Castellanos, M. Carsí, V. López y O.A. Ruano, Resúmenes XI Congreso Nacional deMateriales, Zaragoza, España, 2010, Sociemat, 2010, pp. 249-252.

[13] D. Ponge y G. Gottstein, Acta. Mater. 46 (1998) 69-80. doi:10.1016/S1359-6454(97)00233-4

Downloads

Published

2010-12-31

How to Cite

Rieiro, I., Larrea, M. T., Gutiérrez, V., Triviño, V., Carsí, M., & Ruano, O. A. (2010). New model for the prediction of the final microstructure and the dynamic recrystallization parameters of polycrystalline metallic materials. Application to AZ31 magnesium alloy. Revista De Metalurgia, 46(Extra), 115–127. https://doi.org/10.3989/revmetalmadrid.12XIIPMS

Issue

Section

Articles

Most read articles by the same author(s)

1 2 3 4 > >>