Mold flux characterization for thin slab casting of steel

Authors

  • A. Cruz-Ramírez Metallurgy and Materials Department, ESIQIE- IPN
  • M. Vargas-Ramírez Metallurgy and Materials Research Center. Universidad Autónoma del Estado de Hidalgo
  • M. A. Hernández-Pérez Metallurgy and Materials Department, ESIQIE- IPN
  • E. Palacios-Beas Metallurgy and Materials Department, ESIQIE- IPN
  • J. F. Chávez-Alcalá Metallurgy and Materials Department, ESIQIE- IPN

DOI:

https://doi.org/10.3989/revmetalm.1138

Keywords:

Fluxes, Particle size, Cuspidine, Nepheline

Abstract


The mineralogical constitution and the melting-solidification behavior of two commercial fluxes for thin slab casting of steel were determined. The characterization of the commercial fluxes as received show the presence of wollastonite (CaO. SiO2), a sodium carbonate (Na2CO3), calcite (CaCO3), fluorite (CaF2) and carbon as the main components by X ray powder diffraction (XRD) and microscopic techniques. When fluxes were heated to 1573 K and further solidification, there was almost a whole transformation from the original compounds to cuspidine (3CaO - 2SiO2 - CaF2) and nepheline (Na2O - Al2O3 - 2SiO2) phases. The thermal gravimetrical analysis showed an important weight reduction in both fluxes due to the thermal decompositions of calcite and sodium carbonate. The characterization reveals that fluxes are produced by an agglomeration process.

Downloads

Download data is not yet available.

References

[1] W.L. Mc Cauley and D. Apelian, Iron and Steelmaker, 10 (1983) 38-39.

[2] P. Riboud and M. Larrecq,AIME Steelmaking Proc. 62 (1979) 78-92.

[3] A. Cruz, F. Chávez and J. A. Romero, Rev. Metal. Madrid 40 (2004) 39-45.

[4] M. Kawamoto, K. Nakajima, T. Kanazawa and K. Nakai, ISIJ Int. 34 (1994) 593-598. http://dx.doi.org/10.2355/isijinternational.34.593

[5] M. Hanao, M. Kawamoto and T. Watanabe, ISIJ Int. 44 (2004) 827-835. http://dx.doi.org/10.2355/isijinternational.44.827

[6] A. Cruz, F. Chávez, A. Romero, E. Palacios and V. Arredondo, J. Mater. Process. Tech. 182, 1- 3 (2007) 358-362.

[7] H. Chang, T. Lee and E. Tatsuhiko, Transactions ISIJ 27 (1987) 797-804.

[8] P. Grieveson, S. Bagha, N. Machingawuta, K. Liddell and K.C. Mills, Ironmak Steelmak, 15 (1988) 181-186.

[9] R. Bommaraju, Steelmaking Conference Proc., ISS-AIME 74, 1991, pp 131-146.

[10] T. Watanabe, H. Fukuyama and K. Nagata, ISIJ Int. 42 (2002) 489-497. http://dx.doi.org/10.2355/isijinternational.42.489

[11] R. Soares, M. Fonseca, R. Neuman, V. Meneses A. Lavinas and J. Dweck, Termochimica Acta 318 (1998) 131-136. http://dx.doi.org/10.1016/S0040-6031(98)00337-2

[12] R.G. Hill, N. Da Costa and R.V. Law, J. Non-Cryst. Solids 351 (2005) 69-74. http://dx.doi.org/10.1016/j.jnoncrysol.2004.07.085

[13] J. Romo, A. Cruz, A. Romero, M. Vargas and M. Hallen, Termochimica Acta 512 (2011) 129-133. http://dx.doi.org/10.1016/j.tca.2010.09.014

[14] C. Klein and C. Hurlbut, Manual of mineralogy, Ed. John Wiley & Sons, Singapure, 1977, pp. 234-253.

[15] P. Kerr, Optical mineralogy, Ed. Mc Graw-Hill, USA,1977, pp.148-175.

Downloads

Published

2012-08-30

How to Cite

Cruz-Ramírez, A., Vargas-Ramírez, M., Hernández-Pérez, M. A., Palacios-Beas, E., & Chávez-Alcalá, J. F. (2012). Mold flux characterization for thin slab casting of steel. Revista De Metalurgia, 48(4), 245–253. https://doi.org/10.3989/revmetalm.1138

Issue

Section

Articles

Most read articles by the same author(s)