Mechanical properties determined by nanoindentation tests
DOI:
https://doi.org/10.3989/revmetalm.2004.v40.i5.292Keywords:
Nanoindentation, Ttermal sprayed nickel coatings.Abstract
Mechanical properties obtained through nanoindentation tests have been compared to those provided by the traditional tensile tests. Due to the small dimensions of the coatings, two bulk aluminium alloys with different elastic constants, yield strength and hardening index were tested. The nanoindentation technique was also applied to characterize thermal sprayed nitrogen (Ni) coatings.
Downloads
Download data is not yet available.
Downloads
Published
2004-10-30
How to Cite
Garrido-Maneiro, R. A., López-Galisteo, A. J., & Rodríguez, J. (2004). Mechanical properties determined by nanoindentation tests. Revista De Metalurgia, 40(5), 380–383. https://doi.org/10.3989/revmetalm.2004.v40.i5.292
Issue
Section
Articles
License
Copyright (c) 2004 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
