A review of the atmospheric corrosion of zinc in outdoor and indoor atmospheres
DOI:
https://doi.org/10.3989/revmetalm.2007.v43.i2.60Keywords:
Atmospheric corrosion, Zinc, Corrosion products, SO<sub>2</sub>, NO<sub>2</sub>.Abstract
Good behaviour of zinc against atmospheric corrosion has leaded this material to be widely used, mainly for protection of steel. For this reason since approximately 50 years it have been making systematic studies in order to understand the mechanisms of its interaction with the atmosphere and nowadays it continues being object of intensive research. In this paper a review of the state-of-the-art in the knowledge of atmospheric corrosion of zinc is presented, when it is exposed in both outdoor and indoor atmospheres.
Downloads
References
[1] D. Knotkova, P. Boschek y K. Kreislova, Atmospheric Corrosion, STP 1239, W.W. Kirk y H. Lawson (Eds.), ASTM, Filadelfia, EEUU, 1995, pp. 38-55.
[2] S. Dean Y D. Reiser., Outdoor Atmospheric Corrosion, STP 1421, H. Towsend (Ed.), ASTM, West Conshohocken, EEUU, 2002, pp. 3-18.
[3] J. Simancas, J.G. Castaño y M. Morcillo, Rev. Metal. Madrid Vol. Extr. (2003) 23-27.
[4] J. Tidblad, V. Kucera, A. Mikhailov, J. Henriksen, K. Kreislova, T. Yates, B. Stöckle y M. Schreiner, Proc. 14th Int. Corrosion Congr., Ciudad del Cabo, Sudáfrica, 1999, Corrosion Institute of South Africa, Kelvin, Sudáfrica, 1999, paper 337.1, pp 1-12.
[5] M. Morcillo, E. Almeida, B. Rosales, J. Urruchurtu y M. Marrocos (Eds.), Corrosión y Protección de Metales en las Atmósferas de Iberoamérica, Parte I: Mapas de Iberoamérica de Corrosividad Atmosférica (Proyecto MICAT, XV.1/CYTED), CYTED, Madrid, España, 1998, pp. 55-243.
[6] M. Morcillo, E. Almeida, F. Fragata Y Z. Panossian (Eds.), Corrosión y Protección de Metales en las Atmósferas de Iberoamérica, Parte II: Protección Anticorrosiva de Metales en las Atmósferas de Iberoamérica (Red Temática PATINA, XV.D/CYTED), CYTED, Madrid, España, 2002, pp. 1-59.
[7] M. Ohanian, R. Caraballo, E. A. Dalchiele, G. Gunieo Cobs, V. Martínez Luaces y E. Quagliata, Rev. Metal. Madrid 41 (2005) 175-185.
[8] A. Sánchez, M. Sanjurgo, F. Bouzada Y S. Urréjola, Rev. Metal. Madrid 41 (2005) 330-339.
[9] C. Leygraf Y T. Graedel. Atmospheric Corrosion, Wiley, Nueva York, EEUU, 2000, pp. 9-36.
[10] D. De La Fuente, B. Chico Y M. Morcillo, Rev. Metal. Madrid Vol. Extr. (2005) 438-442.
[11] J. F. Cole, Proc. Zinc & Lead `95, Sendai, Japón, The Mining and Materials Processing Institute of Japan, Sendai, Japón, 1995, pp.15-26.
[12] V. Kucera y E. Mattsson, Corrosion Mechanisms, F. Mansfeld (Ed.), Dekker, Nueva York, EEUU, 1987, pp. 255-264.
[13] T.E. Graedel, J. Electrochem. Soc. 136 (1989) 193C-203C. doi:10.1149/1.2096868
[14] C. J. Slunder y W.K. Boyd, Zinc: Its Corrosion Resistance, ILZRO, 2ª ed., Nueva York, EEUU, 1983, pp. 1-112.
[15] F. Porter, Corrosion Resistance of Zinc and Zinc Alloys, Marcel Dekker, Nueva York, EEUU, 1994, pp. 1-262.
[16] E.A. Anderson, ASTM Symp. Atmospheric Corrosion on Non-Ferrous Materials, STP 175, American Society for Testing and Materials, Filadelfia, EEUU, 1955, pp. 126-134.
[17] F.H. Haynie y J.B. Upham, Mater. Prot. And Perform. 9 (1970) 35-40.
[18] G. Schikorr e I. Schikorr, Z. Metallkd. 35 (1943) 175-181.
[19] H. Guttman, Metal Corrosion in the Atmosphere, STP 435, American Society for Testing and Materials, Filadelfia, EEUU, 1968, pp. 223-239.
[20] L. Atteraas y S. Haagenrud, Atmospheric Corrosion, W.H. Ailor (Ed.), John Wiley & Sons, Nueva York, EEUU, 1982, pp. 873-891.
[21] F.H. Haynie, J. W. Spence, F. Lipfert, S. Cramer y L. G. Mcdonald, Corrosion Testing and Evaluation: Silver Anniversary Volume, STP 1000, R, Baboian y S. W. Dean (Eds.), ASTM, Filadelfia, EEUU, 1990, pp. 225-240.
[22] I. Odnevall, Doctoral Thesis, Royal Institute of Technology, Estocolmo, 1994.
[23] K. Barton, Protection Against Atmospheric Corrosion, John Wiley, Nueva York, Estados Unidos, 1976. pp. 64-68.
[24] W. R. Osorio, C.M.A. Freire Y A. García, Rev. Metal. Madrid Vol. Extr. (2005) 160-164.
[25] X.G. Zhang, Corrosion and Electrochemistry of Zinc, Plenum Press, Nueva York, 1996. pp. 241-281.
[26] J. G. Castaño, Tesis doctoral, Facultad de Ciencias Químicas, Universidad Complutense de Madrid, 2002.
[27] X. G. Zhang Y H. Tran, Cyclic Cabinet Corrosion Testing, STP 1238, G. Haynes (Ed.), ASTM, Filadelfia, EEUU, 1995, pp. 125-135.
[28] B. Roetheli, G. Cox y W. Littreal, Met. Alloys 3 (1932) 73-76.
[29] C. Leygraf e I. Odnevall Wallinder, Proc. 16th Int. Corrosion Congr., Beijing, China, 2005, Chinese Society for Corrosion and Protection, Beijing, China, 2005, pp. 5-6
[30] W. Showak Y S.R. Dunbar, Atmospheric Corrosion of Metals, STP 767, American Society for Testing and Materials, Filadelfia, EEUU, 1982, pp. 135-162.
[31] E. Mattson, Mater. Perform. 21 (1982) 9-19.
[32] J. W. Spence, E. Edney, F. Hayne, D. Stiles, E. Corse, M. Wheeler y S. Cheek, Corrosion Testing and Evaluation: Silver Anniversary Volume, STP 1000, R. Baboian y S. W. Dean (Eds.), ASTM, Filadelfia, EEUU, 1990, pp. 191-207.
[33] V. Kucera, Rev. Metal. Madrid Vol. Extr. (2003) 55-61.
[34] H. Guttman Y P.J. Sereda, Metal Corrosion in the Atmosphere, STP 435, American Society for Testing and Materials, Filadelfia, EEUU, 1968, pp. 326 -359.
[35] M. Morcillo y S. Feliu, Rev. Metal. Madrid 19 (1983) 61-68.
[36] J. W. Spence, F.H. Haynie, F.W. Lipfert, S.D. Cramer Y L.G. Mcdonald, Corrosion 48 (1992) 1009-1019.
[37] J. M. Costa y M. Vilarasa, Br. Corros. J. 28 (1993) 117-120.
[38] J. J. Santana, F. J. Santana y J. E. González, Corros. Sci. 45 (2003) 799-815. doi:10.1016/S0010-938X(02)00081-1
[39] I. S. Cole, W. D. Ganther, S. A. Furman, A. K. Neufeld, D. Lau, L. Chotimongkol, C. Bhamornsut, S. Purwardia, N. V. Hue y S. Bernardo, Corros. Sci. Technol. 31 (2002) 454-460.
[40] J. Morales, F. Diaz, J. Borges, S. Gonzalez y V. Cano, Proc. Trends in Electrochemistry and Corrosion at the Beginning of the 21st Century, Barcelona, España, 2004, Publicacions de la Universitat de Barcelona, Barcelona, España, 2004, pp. 659-673.
[41] T.E. Graedel, Proc. 9th Int. Congr. on Metallic Corrosion, vol. 1, Toronto, Canadá, 1984, NRC, Ottawa, 1984, pp. 396-400.
[42] T.E. Graedel y R.P. Frankental, J. Electrochem. Soc. 137 (1990) 2385-2395. doi:10.1149/1.2086948
[43] V. Kucera, Proc. 7th Ibero-American Congr. Of Corrosion and Protection and 4th NACE Latin-American Region Corrosion Congr., Cartagena de Indias, Colombia, 2000, Ed. Universidad de Antioquia, Medellín, Colombia, 2000, paper PL8, pp. 1-4.
[44] M. Faller, M. Zöbeli, y P. Richner, Proc. 14th Int. Corrosion Congr., Ciudad del Cabo, Sudáfrica, 1999, Corrosion Institute of Southern Africa, Kelvin, Sudáfrica, 1999. pp 1-5.
[45] U.R. Evans y C.A. Taylor, Br. Corros. J. 9 (1974) 26.
[46] P.W. Brown y L.W. Masters, Atmospheric Corrosion, Ed. W.H. Ailor, John Wiley & Sons, Nueva York, EEUU, 1982, pp. 31-50.
[47] M. Morcillo, B. Chicó, L. Mariaca y E. Otero, Corros. Sci. 42 (2000) 91-104. doi:10.1016/S0010-938X(99)00048-7
[48] Q. Qu, C. Yana, Y. Wana y C. Caoa, Corros. Sci. 45 (2003) 2.851-2.866.
[49] J.F. Henriksen y A. Rode, Proc. 10th Scandinavian Corrosion Congr., Estocolmo, Suecia, 1986, Swedish Corrosion Institute, Estocolmo, Suecia, 1986, pp. 39-42.
[50] T.E. Graedel y N. Schwartz, Mater. Perform. 16 (1977) 17-18.
[51] B. Stöckle, A. Krätschmer, M. Mach y S. Snethlage, ICP/UN/ECE International Cooperative Program on Effects on Materials, Including Historic and Cultural Monuments, Report No. 23, ICP/UN/ECE, Munich, Alemania, 1998.
[52] P. Eriksson Y L-G. Johansson, Proc. 10th Scandinavian Corrosion Congr., Estocolmo, Suecia Suecia, 1986, Swedish Corrosion Institute, Estocolmo, Suecia, 1986, pp. 43-48.
[53] National Acid Precipitation Assessment Programme, Effect of Acidic Deposition on Materials, Report 19, US Government Printing Office, Washington, EEUU, 1990.
[54] J.F. Henriksen, A. Bartonova, K. Arnesen y Rode A., ICP/UN/ECE International Cooperative Program on Effects on Materials, Including Historic and Cultural Monuments, Report No. 9, Norwegian Institute for Air Research, Lillestrom, Finlandia, 1992.
[55] D.W. Rice, R. J. Capell, W. Kinsolving y J. J. Laskowski, J. Electrochem. Soc. 127 (1980) 891-897. doi:10.1149/1.2129780
[56] S. Cramer, J. P. Carter, P.J. Linstrom y D. R. Flinn., The Degradation of Metal in the Atmosphere, STP 965, Ed. S.W. Dean y T.S. Lee (Eds.), ASTM, Filadelfia, Estados Unidos, 1988, pp. 229-238.
[57] F.H. Haynie, J. W. Spence Y J. B. Upham, Mater. Perform. 15 (1976) 48.
[58] F. Mansfeld, S.L. Jeanjaaquet, M.W. Kendig y D.K. Roe, Atmos. Environ. 20 (1986) 1.179-1.192.
[59] E.O. Edney, D. C. Stiles, J. W. Spence, F. H. Haynie y W. E. Wilson, Materials Degradation Caused by Acid Rain, R. Baboian (Ed.), ACS, Washington, EEUU, 1986, pp. 172.
[60] J.-E. Svensson y L.-G. Johansson, Corros. Sci. 34 (1993) 721-740. doi:10.1016/0010-938X(93)90096-Y
[61] J.-E. Svensson y L.-G. Johansson, Proc. 12th Int. Corrosion Congr., Houston, EEUU, 1993, Ed. NACE, Houston, EEUU, 1993, pp. 662-675.
[62] J.-E. Svensson y L.-G. Johansson, J. Electrochem. Soc. 140 (1993) 2.210-2.216.
[63] H. Strandberg L.-G. Johansson y O. Lindqvist, Werkst. Korros. 48 (1997) 721 730. doi:10.1002/maco.19970481102
[64] S. Oesch, S. y M. Faller, Corros. Sci. 39 (1997) 1.505-1.530.
[65] J. G. Castaño, C. Arroyave y M. Morcillo, Proc. 15th Int. Corrosion Congr., Granada, España, 2002, CENIM, Madrid, España, 2002. Paper 018, pp 89-97.
[66] J. J. Friel, Corrosion 42 (1986) 422-426.
[67] T. Falk, J. E. Svensson y L.-G. Johansson, J. Electrochem. Soc. 145 (1998) 39-44. doi:10.1149/1.1838207
[68] R. Lindstrom, L.-G. Johansson y J. E. Svensson, J. Electrochem. Soc. 150 (2003) B583-B588. doi:10.1149/1.1627348
[69] C. Leygraf, Corrosion Mechanisms in Theory and Practice, P. Marcus y J. Oudar (Eds.), Marcel Dekker, Nueva York, EE UU, 1995, pp. 421-455.
[70] J. D. Sinclair, L. Psota-Kelty, R. Comizzoli, R. P. Frankenthal, R. Opila y G. Crane, Proc. 11th Int. Corrosion Congr., vol. 2, Florencia, Italia, 1990, Associazione Italiana di Metalurgia, Milán, Italia, 1990, pp. 2.95-2.103.
[71] E. O. Anderson, Corrosion Resistance of Metals and Alloys, F. L. LaQue y H. R. Copson (Eds), Reinhold, Nueva York, EE UU, 1963, pp. 223-247.
[72] G.B. Munier, L. A. Psota, B. T. Reagor, B. Russiello y J. D. Sinclair, J. Electrochem. Soc. 127 (1980) 265-272. doi:10.1149/1.2129653
[73] E. Johansson, B. Rendahl, V. Kucera, C. Leygraf, D. Knotkova, J. Vlckova y J. Henriksen, Proc. 13th Int. Corrosion Congr., Melbourne, Australia, 1996, Australasian Corrosion Association, Victoria, Australia 1996. Paper 019, pp 147-153.
[74] E.A. Anderson y C.E. Reinhard, The Corrosion Handbook, H.H. Uhlig (Ed.), John Wiley & Sons, Nueva York, EE UU, 1948, pp. 331.
[75] M. Stratmann, Corros. Sci. 23 (1983) 969-985. doi:10.1016/0010-938X(83)90024-0
[76] J. R. Vilche, F. E. Varela, G. Acuña, E. N. Codaro, B. M. Rosales, A. Fernández y G. Moriena, Corros. Sci. 37 (1995) 941-961. doi:10.1016/0010-938X(95)00006-6
[77] W. R. Osorio, C. A. Siqueira, C. M. A. Freire y A. García, Rev. Metal. Madrid, Vol. Extr. (2005) 176-180.
[78] T. H. Lien y L. Hung, Proc. 16th Int. Corrosion Congr., Beijing, China, 2005, Chinese Society for Corrosion and Protection, Beijing, China, 2005, pp. 157.
[79] E. Johansson y J. Gullman, Atmospheric Corrosion, STP 1239, W.W.Kirk y H.H. Lawson (Eds.), ASTM, Filadelfia, EE UU, 1995, pp. 240-256.
[80] P. Montoya, H. Torres y J. G. Castaño, Proc. Int. Workshop on Atmospheric Corrosion and Weathering Steels. Cartagena de Indias, Colombia, 2004, Universidad de Antioquia, Medellín, 2004. pp. 1-8.
[81] I. Odnevall y C. Leygraf, Corros. Sci. 34 (1993) 1.213-1.229.
[82] J. Morales, F. Díaz, J. Hernández-Borges y S. González, Corros. Sci. 48 (2006) 361-371. doi:10.1016/j.corsci.2005.02.030
[83] J. R. Vilche, K. Jüttner, W. J. Lorenz, W. Kautek, W. Paatsch, M. H. Dean y U. Stimming, J. Electrochem. Soc., 136 (1989), 3.773-3.778.
[84] T. Tsuru, Proc. 16th Int. Corrosion Congr., Beijing, China, 2005, Chinese Society for Corrosion and Protection, Beijing, China, 2005, pp. 3.
[85] D.R. Flinn, S. D. Cramer, J. P. Carter, D. M. Hurwitz y P. J. Linstrom, Materials Degradation Caused by Acid Rain, R. Baboian (Ed.), ACS, Washington, EEUU, 1986, pp. 119-151.
[86] D. De La Fuente, J. G. Castaño y M. Morcillo, Corros. Sci. 49 (2007) 1420-1436. doi:10.1016/j.corsci.2006.08.003
[87] I. Odnevall y C. Leygraf, Atmospheric Corrosion, STP 1239, W.W. Kirk y H. Lawson (Eds.), ASTM, Filadelfia, EE UU, 1995, pp. 215-229.
[88] I. Odnevall y C. Leygraf, Corros. Sci. 36 (1994) 1.077-1.087.
[89] I. Odnevall y C. Leygraf, Corros. Sci. 36 (1994) 1.551-1.559.
[90] I. Odnevall, Proc. 13th Int. Corrosion Congr., Melbourne, Australia, 1996, Australasian Corrosion Association, Victoria, Australia, 1996, Paper 018, pp 139-146.
[91] I. Odnevall y C. Leygraf, J. Electrochem. Soc. 138 (1991) 1.923-1.928.
[92] I. Odnevall y M. Westdahl, Corros. Sci. 34 (1993) 1.231-1.242.
[93] T. H. Muster e I. S. Cole, Corros. Sci. 46 (2004) 2319-2335. doi:10.1016/j.corsci.2004.01.002
[94] T. H. Muster, A. K. Neufeld e I. S. Cole, Corros. Sci. 46 (2004) 2.337-2.354.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2007 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
