Isothermal treatment of SAE 92XX Type high silicon steels
DOI:
https://doi.org/10.3989/revmetalm.1996.v32.i1.925Keywords:
Isothermal treatment, Silicon steels, Austempering, ADIAbstract
SAE 9260 type steels have silicon and carbon contents similar to those of the ductile iron matrix, and present a bainitic transformation with the same characteristics as ADI (Austempered Ductile Iron). The hypothesis is that excellent mechanical properties can be obtained by means of austempering (in times so short as to be accessible from the industrial point of view), the same as in ADI and even better because it is a rolling material instead of a cast material. It will be compared with the mechanical properties obtained by quenching and tempering at different temperatures.
Downloads
Download data is not yet available.
Downloads
Published
1996-02-28
How to Cite
Páez, J. L., Fuentes, F., & Battagliese, A. (1996). Isothermal treatment of SAE 92XX Type high silicon steels. Revista De Metalurgia, 32(1), 3–9. https://doi.org/10.3989/revmetalm.1996.v32.i1.925
Issue
Section
Articles
License
Copyright (c) 1996 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
