Tratamientos térmicos de los aceros sinterizados obtenidos a partir de polvos prealeados Fe-1,5% Mo

J. M. Torralba; N. Candela; F. Velasco; L.E.G. Cambronero; J. M. Ruiz-Prieto

doi:10.3989/revmetalm.1995.v31.i2.969

Heat treatments of sintered steels obtained from Fe-1,5% Mo prealloyed powders

Authors

J. M. Torralba Dpto. de Ingeniería de Materiales. E.T.S. de Ingenieros de Minas. Universidad Politécnica de Madrid
N. Candela Dpto. de Ingeniería de Materiales. E.T.S. de Ingenieros de Minas. Universidad Politécnica de Madrid
F. Velasco Dpto. de Ingeniería de Materiales. E.T.S. de Ingenieros de Minas. Universidad Politécnica de Madrid
L.E.G. Cambronero Dpto. de Ingeniería de Materiales. E.T.S. de Ingenieros de Minas. Universidad Politécnica de Madrid
J. M. Ruiz-Prieto Dpto. de Ingeniería de Materiales. E.T.S. de Ingenieros de Minas. Universidad Politécnica de Madrid

DOI:

https://doi.org/10.3989/revmetalm.1995.v31.i2.969

Keywords:

Prealloyed steels, Heat treatments

Abstract

The influence of several heat treatments on the mechanical and physical properties of three different sintered Ni-Cu-Mo alloyed steels are evaluated. The heat treatments carried out were quenching and tempering at different temperatures. The raw material studied was a Fe-Mo prealloyed powder with an 1.5% Mo content.

Downloads

Download data is not yet available.

Downloads

Published

1995-04-30

How to Cite

Torralba, J. M., Candela, N., Velasco, F., Cambronero, L., & Ruiz-Prieto, J. M. (1995). Heat treatments of sintered steels obtained from Fe-1,5% Mo prealloyed powders. Revista De Metalurgia, 31(2), 71–77. https://doi.org/10.3989/revmetalm.1995.v31.i2.969

Download Citation

Issue

Vol. 31 No. 2 (1995)

Section

Articles

License

This work is licensed under a Creative Commons Attribution 4.0 International License.

© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.

All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.

Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.