Vol. 40 No. 6 (2004)

DOI: https://doi.org/10.3989/revmetalm.2004.v40.i6

Published: 2004-12-30

Articles

[es] Duplex stainless steel surface bay laser cladding

V. Amigo, Y. Pineda, F. Segovia, A. Vicente

403-408
- PDF
[es] Arsenic precipitation from metallurgical effluents

P. Navarrro, C. Vargas, E. Araya, I. Martín, F. J. Alguacil

409-412
- PDF
[en] Surface modification of Ti-6AI-4V alloy with Ti-C/Ti-N/Ti multilayered film by magnetron DC sputtering

T. Sonoda, A. Watazu, J. Zhu, W. Shi, T. Yamada, K. Kato, T. Asahina

413-415
- PDF
[en] Neural predictor of the end point in a converter

R. Valentini, V. Colla, M. Vannucci

416-419
- PDF
[es] Application of low current intensitys electrolytic treatment for the chlorides extraction in underwater archaeological objects of iron. Observation of the mineralogical phases evolution through XRD-"Rietveld"

M. Bethencourt, M. L.A. Gil, C. Fernández-Lorenzo, A. Santos

420-425
- PDF
[es] Copper corrosion originated by volatile organic acid vapours

E. Cano, J. L. Polo, D. Y. Kong, E. M. Mora, J. A. López-Caballero, J. M. Bastidas

426-430
- PDF
[es] Characterization of fracture behavior of 2024-O and 2024-T3 aluminum alloys

A. Monslave, R. Morales

431-435
- PDF
[es] Influence of the corrosive medium and applied load direction on the stress corrosion cracking behaviour of 7075 aluminium alloy

J. M. Badía, J. M. Antoranz, P. Tarín, A. G. Simón, N. M. Piris

436-441
- PDF
[es] Corrosion and inhibition of medium-strength aluminum alloys

B. Davó, J. J. Damborenea

442-446
- PDF

Technical Notes

[es] Analysis of the influence of process conditions on the surface finish of ceramic materials manufactured by EDM

I. Puertas-Arbizu, C. J. Luis-Pérez

447-457
- PDF
[en] Metallurgical reactions in the coalescence zone between a reinforcement and a base metal in reinforced brazed joints

B. Zorc, L. Kosec

458-466
- PDF

[es] Índice general

Equipo Editorial

467-470
- PDF
[es] Índice temático

Equipo Editorial

471-474
- PDF
[es] Índice de autores

Equipo Editorial

475-476
- PDF
[es] Revisores científicos

Equipo Editorial

477-478
- PDF