Vol. 39 No. Extra (2003)

Congress LATINCORR'2000. Cartagena de Indias, 17-22 September 2000

DOI: https://doi.org/10.3989/revmetalm.2003.v39.iExtra

Published: 2003-12-17

Editorial

[es] Editorial

Óscar A. Ruano, Carlos E. Arroyave P.
- PDF

Articles

[en] Kinetics of structural rust transformation in environments containing chloride and SO₂

J. L. Rendon, A. Valencia

9-14
- PDF
[en] Release of alkali salts and coal volatiles affecting internal components in fluidized bed combustion systems

E. Arias del Campo, A. Keer-Rendon, L. Manzanares-Papayanopoulos, R. Bautista-Margulis

15-22
- PDF
[en] Corrosion and protection of metals in the rural atmosphere of "El Pardo" Spain (PATINA / CYTED project)

J. Simancas, J. G. Castaño, M. Morcillo

23-27
- PDF
[en] An X-ray diffraction study of corrosion products from low carbon steel

A. L. Morales

28-31
- PDF
[en] Study of the corrosion products formed on carbon steels in the tropical atmosphere of Panama

J. A. Jaén, M. S. de Villalaz, L. de Araque, C. Hernández, A. de Bósquez

32-37
- PDF
[en] Electrochemical noise evaluation of anodized aluminum. Comparative study against corrosion behaviour in the atmosphere

N. Betancourt, F. Corvo, A. Mendoza, J. Simancas, M. Morcillo, J. A. González, F. Fragata, J. J. Peña, M. Sánchez de Villalaz, S. Flores, E. Almeida, S. Rivero, O. T. de Rincón

38-42
- PDF
[en] Changes in acceleration rate of chloride ions depending on climatic conditions. Influence of rain

F. Corvo, C. Arroyave, M. Autié, J. Minotas, J. Balmaseda, J. Delgado, C. Haces

43-48
- PDF
[en] Prevention and protection of the effects of biocorrosion and biofouling minimizing the environmental impact

S. G. Gómez de Saravia, P. S. Guiamet, H. A. Videla

49-54
- PDF
[en] Reduction of air pollutants - a tool for control of atmospheric corrosion

V. Kucera

55-61
- PDF
[en] Synthesis and Mössbauer characterization of Cu and Cr doped magnetites

C. A. Barrero, A. L. Morales, J. Mazo-Zuloaga, F. Jaramillo, G. Pérez, D. M. Escobar, C. Arroyave, J. Tobón, P. M. Montoya, L. Osorio, R. E. Vandenberghe, J. M. Greneche

62-67
- PDF
[en] Corrosion related iron oxides: Cu, Mn and Cr doped hematite

G. Pérez, C. Barrero, A. Morales, J. Tobon, O. Garnache, C. Rodríguez, C. Arroyave

68-71
- PDF
[es] Advantages of Wavelet analysis compared to Fourier analysis for the interpretation of electrochemical noise

L. Espada, M. Sanjurjo, S. Urréjola, F. Bouzada, G. Rey, A. Sánchez

72-79
- PDF
[es] Evaluation of sensitization in stainless steel AISI 304

O. González, G. Santos

80-85
- PDF
[en] An electrochemical investigation of the corrosion behavior of Al-Si-Cu hypereutectic alloys in alcoholic environments

S. M. Traldi, J. L. Rossi, I. Costa

86-90
- PDF
[en] The corrosion resistance of materials used for the manufacture of ear piercing studs

O. V. Correa, M. Saiki, S. O. Rogero, I. Costa

91-96
- PDF
[en] Electrochemical assessment of magnetite anticorrosive paints

D. M. Escobar, C. Arroyave, F. Jaramillo, O. R. Mattos, I. C. Margarit, J. Calderón

97-103
- PDF
[en] Changes in the morphology of porous anodic films formed on aluminium in natural and artificial ageing

V. López, E. Otero, A. Bautista, E. Escudero, J. A. González

104-109
- PDF
[en] Self-sealing of unsealed aluminium anodic oxide films in very different atmospheres

J. A. González, M. Morcillo, E. Escudero, V. López, A. Bautista, E. Otero

110-115
- PDF
[en] Measuring naphthenic acid corrosion potential with the Fe powder test

J. L. Hau, O. J. Yepez, L. H. Torres, J. R. Vera

116-123
- PDF
[en] Stray current induced corrosion in lightning rod cables of 525 kV power lines towers: a case study

F. R. Wojcicki, M. E. M. Negrisoli, C. V. Franco

124-128
- PDF
[en] Use of zinc-rich primers co-pigmented with phosphates applied on rusty steel surfaces contaminated with soluble salts

D. de la Fuente, B. Chico, M. Morcillo

129-136
- PDF
[en] A study of mortars prepared with fly ash and silica fume for use in structures exposed to marine enviroments

Y. Hernández, O. de Rincón, R. Fernández

137-142
- PDF
[en] Lap-joint testing of precoated steel materials

B. Chico, D. de la Fuente, M. Morcillo, E. Otero, J. A. González

143-150
- PDF
[en] Behaviour of painted aluminium in Ibero-American atmospheres

M. Morcillo, J. Simancas, F. Corvo, B. Rosales, F. Fragata, J. Peña, M. Sánchez, S. Flores, E. Almeida, S. Rivero, O. T. de Rincón

151-156
- PDF
[en] Passivating action of an organic inhibitor on the steel of reinforced concrete

E. Anzola, R. Malavé, V. Barrios, D. Villarroel, A. Tiso, M. Parra

157-161
- PDF
[en] Carburization of austenitic and ferritic alloys in hydrocarbon environments at high temperature

A. Serna, R. A. Rapp

162-166
- PDF
[en] Weathering of coil-coatings: UV radiation and thermal effects

A. S. Castela, A. M. Simões, G. Davies, M. G. S. Ferreira

167-173
- PDF
[en] Electrochemical assessment of some titanium and stainless steel implant dental alloys

A. Echevarría, C. Arroyave

174-181
- PDF
[es] Study of the cathodic despolarization theory with hydrogen permeation and the bacteria Desulfovibrio desulfuricans

M. F. de Romero, Z. Duque, O. T. de Rincón, O. Pérez, I. Araujo

182-187
- PDF
[en] Low carbon steel corrosion damage prediction in rural and urban environments

V. Díaz, C. López, S. Rivero

188-193
- PDF
[en] Accelerated tests of coil coatings

B. M. Rosales, J. Simancas, S. Flores

194-200
- PDF
[en] PATINA Network - Performance of coil coating in natural atmospheres of Ibero-America

B. M. Rosales, A. R. Di Sarli, F. Fragata, F. Corvo, M. S. de Villalaz, S. Flores, E. Almeida, J. Simancas, S. Rivero, O. T. de Rincón

201-205
- PDF
[en] Analysis of coatings appearance and durability testing induced surface defects using image capture/processing/analysis

F. Lee, B. Pourdeyhimi, C. Hazzard, J. Summerville

206-212
- PDF
[en] Modeling of roughness effect on hydrogen permeation in a low carbon steel

J. A. Carreño, I. Uribe, J. C. Carrillo

213-218
- PDF
[en] Soluble salts: their incidence on the protection of metallic structures by paint coatings

M. Morcillo

219-227
- PDF
[en] Long-term performance of different aluminum alloy designs as sacrificial anodes for rebars

O. de Rincón, M. Sánchez, M. de Romero, G. Paz, W. Campos

228-234
- PDF
[en] Non-contact one-sided evaluation of hidden corrosion in metallic constructions by using transient infrared thermography

V. P. Vavilov

235-242
- PDF
[en] Porous anodic film formation on an Al-3.5 wt % Cu alloy

M. A. Páez, P. Skeldon, G. E. Thompson, M. Sáez, O. Bustos, A. Monsalve

243-249
- PDF
[en] Effect of supplementary cementing materials on the concrete corrosion control

R. Mejía de Gutiérrez

250-255
- PDF
[en] Biocorrosion and biofouling of metals and alloys of industrial usage. Present state of the art at the beginning of the new millennium

H. A. Videla

256-264
- PDF
[en] Simulation of a long term atmospheric corrosion process on plain and weathering steels

F. Bolivar, A. Morales, C. Arroyave

265-269
- PDF

Vol. 39 No. Extra (2003)

Editorial

[es] Editorial

Articles

[en] Kinetics of structural rust transformation in environments containing chloride and SO2

[en] Release of alkali salts and coal volatiles affecting internal components in fluidized bed combustion systems

[en] Corrosion and protection of metals in the rural atmosphere of "El Pardo" Spain (PATINA / CYTED project)

[en] An X-ray diffraction study of corrosion products from low carbon steel

[en] Study of the corrosion products formed on carbon steels in the tropical atmosphere of Panama

[en] Electrochemical noise evaluation of anodized aluminum. Comparative study against corrosion behaviour in the atmosphere

[en] Changes in acceleration rate of chloride ions depending on climatic conditions. Influence of rain

[en] Prevention and protection of the effects of biocorrosion and biofouling minimizing the environmental impact

[en] Reduction of air pollutants - a tool for control of atmospheric corrosion

[en] Synthesis and Mössbauer characterization of Cu and Cr doped magnetites

[en] Corrosion related iron oxides: Cu, Mn and Cr doped hematite

[es] Advantages of Wavelet analysis compared to Fourier analysis for the interpretation of electrochemical noise

[es] Evaluation of sensitization in stainless steel AISI 304

[en] An electrochemical investigation of the corrosion behavior of Al-Si-Cu hypereutectic alloys in alcoholic environments

[en] The corrosion resistance of materials used for the manufacture of ear piercing studs

[en] Electrochemical assessment of magnetite anticorrosive paints

[en] Changes in the morphology of porous anodic films formed on aluminium in natural and artificial ageing

[en] Self-sealing of unsealed aluminium anodic oxide films in very different atmospheres

[en] Measuring naphthenic acid corrosion potential with the Fe powder test

[en] Stray current induced corrosion in lightning rod cables of 525 kV power lines towers: a case study

[en] Use of zinc-rich primers co-pigmented with phosphates applied on rusty steel surfaces contaminated with soluble salts

[en] A study of mortars prepared with fly ash and silica fume for use in structures exposed to marine enviroments

[en] Lap-joint testing of precoated steel materials

[en] Behaviour of painted aluminium in Ibero-American atmospheres

[en] Passivating action of an organic inhibitor on the steel of reinforced concrete

[en] Carburization of austenitic and ferritic alloys in hydrocarbon environments at high temperature

[en] Weathering of coil-coatings: UV radiation and thermal effects

[en] Electrochemical assessment of some titanium and stainless steel implant dental alloys

[es] Study of the cathodic despolarization theory with hydrogen permeation and the bacteria Desulfovibrio desulfuricans

[en] Low carbon steel corrosion damage prediction in rural and urban environments

[en] Accelerated tests of coil coatings

[en] PATINA Network - Performance of coil coating in natural atmospheres of Ibero-America

[en] Analysis of coatings appearance and durability testing induced surface defects using image capture/processing/analysis

[en] Modeling of roughness effect on hydrogen permeation in a low carbon steel

[en] Soluble salts: their incidence on the protection of metallic structures by paint coatings

[en] Long-term performance of different aluminum alloy designs as sacrificial anodes for rebars

[en] Non-contact one-sided evaluation of hidden corrosion in metallic constructions by using transient infrared thermography

[en] Porous anodic film formation on an Al-3.5 wt % Cu alloy

[en] Effect of supplementary cementing materials on the concrete corrosion control

[en] Biocorrosion and biofouling of metals and alloys of industrial usage. Present state of the art at the beginning of the new millennium

[en] Simulation of a long term atmospheric corrosion process on plain and weathering steels

Make a Submission

Language

Indexing and quality

Plagiarism Detection Tool

Social Networks

Syndication

[en] Kinetics of structural rust transformation in environments containing chloride and SO₂