@article{Djurdjevic_Vicario_2013, title={Description of hypoeutectic Al-Si-Cu alloys based on their known chemical compositions}, volume={49}, url={https://revistademetalurgia.revistas.csic.es/index.php/revistademetalurgia/article/view/1289}, DOI={10.3989/revmetalm.1238}, abstractNote={The modeling of casting processes has remained a topic of active interest for several decades, and the availability of numerous software packages on the market is a good indication of the interest that the casting industry has in this field. Most of the data used in these software packages are directly read or estimated from the binary or multi-component phase diagrams. Unfortunately, except for binary diagrams, many of ternary or higher order phase diagrams are still not accurate enough. Having in mind that most of the aluminum binary systems are very well established, it has been tried to transfer multi-component system into one well known Al-Xi pseudo binary system (in this case the Al-Si phase diagram was chosen as a reference system). The new Silicon Equivalency (Si<sub>EQ</sub>) algorithm expresses the amounts of major and minor alloying elements in the aluminum melts through an “equivalent” amount of silicon. Such a system could be used to calculate several thermo-physical and solidification characteristics of multi component as cast aluminum alloys. This provides to the model the capacity to predict the solidification characteristics of cast parts, where cooling rates are slow and the solidification process has to be known in great detail in order to avoid quality problems in the casting. This work demonstrates how the Si<sub>EQ</sub> algorithm can be used to calculate the characteristic solidification temperatures of the multicomponent Al-Si alloys as well as their latent heats and growth restriction factor. Statistical analysis of the results obtained for a wide range of alloy chemical compositions shows a very good correlation with the experimental data and the Si<sub>EQ</sub> calculations. The same mathematical approach might be applied for other metallic systems such as iron and magnesium, using carbon equivalency for ferrous systems and aluminum equivalency for magnesium multi-component alloys.}, number={5}, journal={Revista de Metalurgia}, author={Djurdjevic, M. B. and Vicario, I.}, year={2013}, month={Oct.}, pages={340–350} }