Dynamic recrystallization during hot deformation of an armco steel
DOI:
https://doi.org/10.3989/revmetalm.2001.v37.i2.462Keywords:
Dynamic recrystallization, Avrami equation, ARMCO steel, Hot working,Abstract
The onset and kinetics of dynamic recrystallization of an ARMCO steel is characterised in this wok. For this purpose, uniaxial hot compression tests were carried out. The Avrami equation was employed to describe the kinetics of recrystallization. Moreover the critical strain determining the onset for dynamic recrystallization was analysed. It was observed that the latter characteristic parameters were strain rate and temperature dependent. A comparison with published results and a derivation of the possible effect of chemical composition is also offered.
Downloads
Download data is not yet available.
Downloads
Published
2001-04-30
How to Cite
Tafzi, K., Cabrera, J. M., & Prado, J. M. (2001). Dynamic recrystallization during hot deformation of an armco steel. Revista De Metalurgia, 37(2), 184–189. https://doi.org/10.3989/revmetalm.2001.v37.i2.462
Issue
Section
Articles
License
Copyright (c) 2001 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
