Aluminium pm: alloys and composites development and enhancement

Authors

  • E. M. Ruiz-Navas Departamento de Ciencia e Ingeniería De Materiales e Ingeniería Química. Universidad Carlos III de Madrid
  • M. L. Delgado Departamento de Ciencia e Ingeniería De Materiales e Ingeniería Química. Universidad Carlos III de Madrid
  • J. M. Torralba Departamento de Ciencia e Ingeniería De Materiales e Ingeniería Química. Universidad Carlos III de Madrid

DOI:

https://doi.org/10.3989/revmetalm.2008.v44.i3.108

Keywords:

Powder metallurgy, Aluminium alloys, Traces additions, Ceramic reinforcement

Abstract


Powder metallurgy components demand is increasing in the last few years mainly due to the necessity of products assigned to automotive and aerospace industries, which has allow an important development of aluminium alloys and composites (AMCs). Consolidation of aluminium alloys by sintering present a main problem: the oxide layer that cover aluminium particles. Several alternatives are studied in this work as solution to the oxide layer problem during the sintering of series 2xxx aluminium alloys. One of these solutions is related to the addition of tin traces, and the other is the addition of a second alloy. Moreover, aluminium metal matrix composites are characterized by excellent properties as combination of properties which comes from the matrix and from the reinforcement. The last part of this study is focused to the analysis of one aluminium matrix composite as the influence of several quantities of reinforcement.

Downloads

Download data is not yet available.

References

[1] E. Schatzberg, The Cultural History of Aluminium as an Industrial Metal, Vol.4, Ed. Enterprise and Society, 2003, pp. 226-271.

[2] G.E.Totten y D.S. Mackenzie, Handbook of Aluminum: Alloy Production and Materials Manufacturing, Vol. 2, Ed. Marcel Dekker Inc. 2003.

[3] D. Doordan, Promoting Aluminum: Designers and the American Aluminum Industry 8 (1993) 44-50.

[4] D.G. ALTENPOHL, The Aluminum Association Inc., 6th Edition, 1998.

[5] J.S. Robinson, R.L. Cudd y J.T. Evans, Mater. Sci. Tech. 19 (2003) 143-155. doi:10.1179/026708303225009373

[6] G.B. Schaffer, Mat. Tech. & Adv. Perf. 16 (2001) 245-249.

[7] T.B. Sercombe y G. B. Schaffer, Mater. Sci. Eng. A 268 1-2 (1999) 32-39.

[8] G.B. Schaffer, Mater. Forum 20 (1996) 131- 143.

[9] G.B. Schaffer, T. B. Sercombe y R. N. Lumley, Mater. Chem. Phys. 1-3 (2001) 85-91. doi:10.1016/S0254-0584(00)00424-7

[10] J.W. Gibbs, The Scientific Papers of J. Willard Gibbs, Vol. 1, Ed. Longmans, Green, New York, 1906, p. 219.

[11] T.B. Sercombe y G.B. Schaffer, Acta Mater. 47 (1999) 689-697. doi:10.1016/S1359-6454(98)00353-X

[12] J.S.Cho Kwun, Scripta Metall. Mater. 27 (1992) 1.813-1.816.

[13] L. Lu AND M.O. Lai, Mater Design. 16 (1995) 33-39. doi:10.1016/0261-3069(95)00005-J

[14] L. Lu AND M.O. Lai, Mechanical Alloying, Ed. Kluwer Academic, 1998.

[15] M.M. Moshksar y S.M Zebarjad, Iran. J. Sci. Technol. 23 (1999) 239-250.

[16] J.Eckert, J.C.Hilzer, C.E.Krill y W.L JONSON, Mater. Res. 7 (1992) 1.751-1.761.

[17] L. Lu, M.O. Lai y S. Zang, J. Mater. Proc. Tech. 52 (1995) 539-546. doi:10.1016/0924-0136(94)01620-G

[18] E. Ma y M. Altmon, Journal of binary system, Materials Chemistry and Phisycs 39 (1995) 249- 267. doi:10.1016/0254-0584(94)01446-N

[19] C. Surayana, E. Ivanov y V.V. Boldyrev, Mater. Sci. Eng. A 304-306 (2001) 151-158. doi:10.1016/S0921-5093(00)01465-9

[20] L.E.G. Cambronero, E. Sánchez, J.M. Ruizromán y J.M. Ruiz-Prieto, J. Mater. Proc. Tech. 37 (2003) 143-144.

[21] E.M. Ruiz-Navas, C.E. Da Costa, F. Velasco y J.M. Torralba, Rev.Metal. Madrid 36 (2000) 279-286.

[22] P. Romano, J.B. Fogagnolo, A. García y E.M. Ruiz-Navas, Rev. Metal. Madrid 41 (2005) 21-27.

[23] V. Amigó, M.D. Salvador, C. Ferrer, C.E Da Costa y D. Busquets, Rev. Metal. Madrid 37 (2001) 245-249.

[24] A. Kumar Ray, K. Venkateswarlu, S.K. Chaudhury, S.K. Das, B. Ravi Kumar y L.C. Phatak, Mater. Sci. Eng. 8 (2002) 160-165.

[25] J.M. Torralba, C.E. Da Costa y F. Velasco, Rev. Metal. Madrid 36 (2000) 179-192.

[26] J.M. Torralba, C.E. Da Costa y F. Velasco, Rev. Metal. Madrid 36 (2000) 193-197.

[27] F. Tang, I.E. Abderson y S.B. Biner, J. Light Metals. 2 (2002) 201-214. doi:10.1016/S1471-5317(03)00004-X

[28] H.S. Lee, J.S. Yeo, S.H. Hong, D.J. Yong y K.H. Na, J. Mater. Process. Tech. 113 (2001) 202-208. doi:10.1016/S0924-0136(01)00680-X

[29] D.B. Miracle, Comp. Sci. Tech. 65 (2005) 2.526-2.540.

[30] J. Eliasson y R. Sandström, Key Eng. Mater. 104-107 (1995) 3-36.

[31] D. Pitcher, A.J. Shakesheff y J.D. Lord, Mater. Sci. Tech. 14 (1998) 1.015-1.023.

[32] S. Das, Trans. Indian Inst. Met. 57 (2004) 325- 334.

[33] J. W. Kaczmar y K. Pietrzak, J. Mater. Process. Tech. 106 (2000) 58-67. doi:10.1016/S0924-0136(00)00639-7

[34] A. García-Escorial, B. Torresm N. Lieblich y J. Ibañez, Rev. Metal. Madrid 37 (2001) 225-229.

[35] J. Gómez, V. Amigó, D. Busquet y M.D. Salvador, Rev. Metal. Madrid 41 (2005) 365- 373.

[36] V.K. Lindroos y M.J. Talvitie, J. Mater. Process. Tech. 53 (1995) 273-284. doi:10.1016/0924-0136(95)01985-N

[37] R.C. Dorward y T.R. Pritchett, Mater. Design. 9 (1988) 63-69. doi:10.1016/0261-3069(88)90076-3

[38] C.R. Pérez, J.L. Ortiz, V. Amigó y M.D. Salvador, Rev. Metal. Madrid 36 (2000) 348-356.

[39] J. M. Martín y F. Castro, J. Mater. Process. Tech. 143-144 (2003) 814-821. doi:10.1016/S0924-0136(03)00335-2

[40] M. Gunduz y J.D. Hunt, Acta Metall. 9 (1985) 1.651-1.672.

[41] M.L. Delgado, E.M. Ruiz-Navas, E. Gordo y J.M. Torralba, J. Mater. Process. Tech. 162- 163 (2005) 280-285.

[42] M.L. Delgado, E.M. Ruiz-Navas y J.M. Torralba, J. Mater. Sci. 41 (2006) 3.735-3.741.

[43] E.M. Ruiz-Navas, M.L. Delgado, S. Benito y E. Gordo, Mater. Sci. Forum. 534-536 (2007) 841-844.

Downloads

Published

2008-06-30

How to Cite

Ruiz-Navas, E. M., Delgado, M. L., & Torralba, J. M. (2008). Aluminium pm: alloys and composites development and enhancement. Revista De Metalurgia, 44(3), 206–215. https://doi.org/10.3989/revmetalm.2008.v44.i3.108

Issue

Section

Articles

Most read articles by the same author(s)

1 2 > >>