Pitting corrosion detection in stainless steels using ultrasounds
DOI:
https://doi.org/10.3989/revmetalm.005Keywords:
Austenitic stainless steel, Nondestructive testing, Pitting corrosion, UltrasoundsAbstract
Passive metallic systems are able to develop in a spontaneous way a protective layer on the metallic surface that offers excellent corrosion resistance since really in a physical barrier for the reaction with the environment. However, some factors can break locally this layer, promoting one of the most insidious attack, pitting corrosion, which produces local chemical conditions that favouring the corrosive process causing defects in the material, as externals and internals ones, with a random distribution on the metal surface. In this work, ultrasounds non destructive technique has been employed using as variable the maximum amplitude of the backwall echo in order to detect this type of attack. The material employed is an austenitic stainless steel AISI 304, wherein appear several defectology distributions as superficial such as depths simulating pits.
Downloads
References
Antonya, P.J., Singh Raman, R.K., Raman, R., Kumar, P. 2010. Role of microstructure on corrosion of duplex stainless steel in presence of bacterial activity. Corros. Sci. 52 (4), 1404–1412. http://dx.doi.org/10.1016/j.corsci.2009.12.003
ASTM G46 – 94, 2005. Standard Guide for Examination and Evaluation of Pitting Corrosion.
Bethencourt, M., García de Lomas, J., Corzo, A., Villahermosa, D., Matres, V. 2010. Efecto de la biopelícula en la corrosión de aceros inoxidables. Rev. Metal. 46 (1), 37–51. http://dx.doi.org/10.3989/revmetalm.0910
Biezma, M.V., Berlanga, C., Larrea, I. 2011. Estudio fractográfico de los aceros inoxidables dúplex UNS S32205 y UNS S32750 con distintos tratamientos térmicos. An. Mec. Fract. 28, 169–174.
Duret-Thual, C. 2011. Pitting and crevice corrosion – Basic mechanistic aspects for the selection and use of stainless steels. Matériaux & Techniques 99 (81–91), 81–91.
Fajardo, S., Bastidas, D.M., Ryan, M.P., Criado, M., McPhail, D.S., Bastidas, J.M. 2010. Low-Nickel Stainless Steel Passive Film in Simulated Concrete Pore Solution: A SIMS Study. Appl. Surf. Sci. 256 (21), 6139–6143. http://dx.doi.org/10.1016/j.apsusc.2010.03.140
Garin, J.L., Manheim, R.L., Camus, M.A. 2010. Estudio sobre la disolución de fase sigma en un acero dúplex S31803. Rev. Latinoam. Metal. Mater. 30, 46–53.
Gosálbez, J., Salazar, A., Miralles, R., Bosch, I., Vergara, L. 2005. Mejora de la detección y caracterización de materiales con un sistema automático de ultrasonidos. Proc Symposium URSI2005, Gandia, Espa-a, Union Radio-Scientifique Internationale, Ghent, Bélgica, 1–4.
Hamzah, E., Hussain, M.Z., Ibrahim, Z., Abdolahi, A. 2013. Influence of Pseudomonas aeruginosa bacteria on corrosion resistance of 304 stainless steel. Corros. Eng. Sci. Technol. 48 (2), 116–120. http://dx.doi.org/10.1179/1743278212Y.0000000052
Hastuty, S., Nishikata, A., Tsuru, T. 2010. Pitting corrosion of type 430 stainless steel under chloride solution droplet. Corros. Sci. 52 (6), 2035–2043. http://dx.doi.org/10.1016/j.corsci.2010.02.031
Hinds, G., Wickström, L., Mingard, K., Turnbull, A. 2013. Impact of surface condition on sulphide stress corrosion cracking of 316L stainless steel. Corros. Sci. 71, 43–52. http://dx.doi.org/10.1016/j.corsci.2013.02.002
Kim, S.-T., Jang, S.-H., Lee, In-S., Park, Y.-S. 2011. Effects of solution heat-treatment and nitrogen in shielding gas on the resistance to pitting corrosion of hyper duplex stainless steel welds. Corros. Sci. 53, 1939–1947. http://dx.doi.org/10.1016/j.corsci.2011.02.013
Krautkrämer, J., Krautkrämer, H. 1990. Ultrasonic testing of materials. Springer-Verlag, Berlin. http://dx.doi.org/10.1007/978-3-662-10680-8
Linhardt, P. 2010. Twenty years of experience with corrosion failures caused by manganese oxidizing microorganisms. Mater. Corros. 61 (12), 1034–1039. http://dx.doi.org/10.1002/maco.201005769
Maier, B., Frankel, G.S. 2010. Pitting corrosion of bare stainless steel 304 under chloride solution droplets. J. Electrochem. Soc. 157 (10), C302–C312. http://dx.doi.org/10.1149/1.3467850
Mirjalili, M., Momeni, M., Ebrahimi, N., Moayed, M.H. 2013. Comparative study on corrosion behaviour of Nitinol and stainless steel orthodontic wires in simulated saliva solution in presence of fluoride ions. Mater. Sci. Eng. C 33 (4), 2084–2093. http://dx.doi.org/10.1016/j.msec.2013.01.026 PMid:23498236 Moreno, D.A., García, A.M., Ranninger, C., Molina, B. 2011. Corrosión por picaduras en depósitos de agua de acero inoxidable austenítico en trenes hotel. Rev. Metal. 47 (6), 497–506. http://dx.doi.org/10.3989/revmetalm.1146
Orlikowski, J., Krakowiak, S. 2013. Pitting corrosion and stress-corrosion cracking of buffer tanks in a brewery. Eng. Fail. Anal. 29, 75–82. http://dx.doi.org/10.1016/j.engfailanal.2012.10.013
Pardo, A., Otero, E., Merino, M.C., López, M.D., Utrilla, M.V. 2001. Estudio de la resistencia a la corrosión localizada del acero inoxidable superaustenítico 24,1Cr22Ni7,1Mo en mezclas que contienen iones cloruro y cloruro-fluoruro. Rev. Metal. 37, 499–508. http://dx.doi.org/10.3989/revmetalm.2001.v37.i4.515
Rodríguez, C., Fernández, M., Alonso, L., Pérez-Oria, J.M. 2006. Sistema de detección automatizado de grietas en piezas de fundición mediante ultrasonidos y técnicas clásicas de reconocimiento. Proc XXVII Jornadas de Automática, Almería, Espa-a, CEA, Barcelona, Espa-a, 1–7.
Rodríguez, C. 2012. Sistema automatizado de detección de defectos en piezas metálicas mediante ensayos no destructivos con ultrasonidos. Tesis Doctoral, Escuela Superior de Ingenieros Industriales y de Telecomunicación, Universidad de Cantabria, Espa-a. ISBN: 978-84-616-1307-6.
Rodríguez, C., Biezma, M.V., Fernández, M. 2013. Characterization of sigma in duplex stainless steels using non-destructive techniques by ultrasounds. Mater. Test. 55 (6), 448–454. http://dx.doi.org/10.3139/120.110461
Sambath, S., Nagaraj, P., Selvakumar, N. 2011. Automatic defect classification in ultrasonic NDT using artificial intelligence. J. Nondestruct. Eval. 30 (1), 20–28. http://dx.doi.org/10.1007/s10921-010-0086-0
Sandvik. www.sandvik.com.
Shivaraj, K., Wadhwan, R., Balasubramaniam, K., Krishnamurthy, C.V. 2008. Ultrasonic circumferential guided wave for pitting type corrosion imaging at inaccessible pipe support locations. J. Press. Vessel. Technol. 130 (2), 1–11. http://dx.doi.org/10.1115/1.2892031
Szklarska-Smialowska, Z. 1972. Influence of sulfide inclusions on pitting corrosion of steels. Corrosion 28 (10), 388–396. http://dx.doi.org/10.5006/0010-9312-28.10.388
Tavares, S.S.M., Pardal, J.M., Ponzio, E., Loureiro, A., de Souza, J.A. 2010. Influence of microstructure on the corrosion resistance of hyperduplex stainless steel. Mater. Corros. 61 (4), 313–317.
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.