Comparison of brazed joints made with BNi-1 and BNi-7 nickel-base brazing alloys
DOI:
https://doi.org/10.3989/revmetalm.2000.v36.i2.561Keywords:
Brazed joint, Diffusion annealing, Metallurgical reactions, Microstructure, Mechanical propertiesAbstract
Kinetics of the processes are different with different types of brazing alloys. Precipitation processes in the parent metal close to the brazing gap are of great importance. They control the mechanical properties of the joint area when the brittle eutectic has disappeared from the gap. A comparative study of brazed joints on austenitic stainless alloys made with BNi-7 (Ni-P type) and BNi-1 (Ni-Si-B type) brazing alloys was made. Brazing alloys containing phosphorus behave in a different manner to those containing boron.
Downloads
Download data is not yet available.
Downloads
Published
2000-04-30
How to Cite
Zorc, B., & Kosec, L. (2000). Comparison of brazed joints made with BNi-1 and BNi-7 nickel-base brazing alloys. Revista De Metalurgia, 36(2), 100–107. https://doi.org/10.3989/revmetalm.2000.v36.i2.561
Issue
Section
Articles
License
Copyright (c) 2000 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
