a-SiN:H films modified by ArF excimer laser irradiation

Authors

  • N. Banerji Dpto. Física Aplicada, Univ. de Vigo
  • J. Serra Dpto. Física Aplicada, Univ. de Vigo
  • S. Chiussi Dpto. Física Aplicada, Univ. de Vigo
  • F. Lusquiños Dpto. Física Aplicada, Univ. de Vigo
  • B. León Dpto. Física Aplicada, Univ. de Vigo
  • M. Pérez-Amor Dpto. Física Aplicada, Univ. de Vigo

DOI:

https://doi.org/10.3989/revmetalm.1998.v34.i2.682

Keywords:

LCVD, Film, Silicon nitride, Irradiation, ArF laser

Abstract


Hydrogenated amorphous silicon nitride (a:SiN:H) films produced by CO2 and ArF laser-induced CVD in parallel configuration using silane/ammonia or disilane/ammonia gas mixtures were subjected to room temperature multiple pulse ArF excimer laser irradiations in an inert gas atmosphere. Modifications in their chemical composition, refractive index, and surface morphology were systematically followed up through Fourier-transform infrared spectroscopy (FTIR), energy dispersive X-ray spectroscopy (EDS), single wavelength ellipsometry and atomic force microscopy (AFM), respectively. The observed film modifications involving large reductions in hydrogen (Si-H and N-H ) with the first few shots accompanied by a progressive incorporation of oxygen (Si-O and Si-OH) and a reduction of Si-N bonds that are attributed to UV-induced photochemistry where the atmospheric water incorporated in the films between successive irradiations plays an important role. Comparison among the different films indicated that the extent of bonded hydrogen in the films and their surface morphology influence their oxidation resistance.

Downloads

Download data is not yet available.

Downloads

Published

1998-04-30

How to Cite

Banerji, N., Serra, J., Chiussi, S., Lusquiños, F., León, B., & Pérez-Amor, M. (1998). a-SiN:H films modified by ArF excimer laser irradiation. Revista De Metalurgia, 34(2), 164–169. https://doi.org/10.3989/revmetalm.1998.v34.i2.682

Issue

Section

Articles

Most read articles by the same author(s)