Microstructural characterization and process selection by attributive analysis of eutectic and quasi-eutectic Al-Si alloys for pressure die casting

Authors

  • B. Suárez-Peña Department of Materials Science and Metallurgical Engineering, Technical School of Industrial Engineering, The University of Oviedo
  • J. Asensio-Lozano Department of Materials Science and Metallurgical Engineering, The School of Mines, The University of Oviedo
  • J. I. Verdeja-González Department of Materials Science and Metallurgical Engineering, The School of Mines, The University of Oviedo
  • J. A. Pero-Sanz Elorz Department of Engineering Materials, The School of Mines, The Polytechnical University of Madrid

DOI:

https://doi.org/10.3989/revmetalm.2007.v43.i4.76

Keywords:

Eutectic aluminium, silicon alloys, Quantitative metallography, Pressure die cast

Abstract


In the present study, four alloys from diverse suppliers suitable for obtaining 413.0 metallurgical quality products together with alloy number 2 with an slightly hypoeutectic composition in Silicon were processed. The study focused on the microstructural characterization of the as-received ingots, as well as that of samples obtained from the production process: die cast samples and cold chamber pressure die cast samples. Finally a materials selection process base on microstructural grounds has been put forward as to determine the most suitable starting alloy for industrial production.

Downloads

Download data is not yet available.

References

[1] Aluminium and Aluminium Alloys, A. S. M. Specialty Handbook, A. S. M. International Materials Park, O. H., 1994, pp. 26.

[2] J. A. Pero-Sanz, Ciencia e Ingeniería de Materiales, CIE Inversiones Editoriales – Dossat 2000, Madrid, España, 2000. p. 161.

[3] S. J. Shabestari, Mat. Sci. Technol. A 383 (2004) 289-298.

[4] F.Mondolfo, Aluminium Alloys: Structure and Properties, London, Butterworth, 1976, pp. 534-776.

[5] B. Suárez-Peña y J. Asensio-Lozano, Scr. Mater. 54 (2006) 1543-1548. doi:10.1016/j.scriptamat.2006.01.029

[6] S. K. Tang y T. Sritharan, Mater. Sci. Technol. 14 (1998) 738-742.

[7] J. Asensio-Lozano y B. Suárez-Peña, Mater. Char. 56 (2006) 169-177. doi:10.1016/j.matchar.2005.10.016

[8] J. Asensio-Lozano y B. Suárez-Peña, Mater. Char. 56 (2006) 178-184. doi:10.1016/j.matchar.2005.10.017

[9] J. Muirhead, J. Cawley, A. Strang, C. A. English y J. Titmarsh, Mater. Sci. Technol. 16 (2000) 1160-1166.

[10] G. F. Vander Voort, Precision and reproductivity of quantitative measurements, ASM International. Materials Park, OH, 1994, pp. 31-34.

[11] R. L. Higginson y C. M. Sellars, Worked examples in quantitative metallography, Institute of Metals, Maney Publishing, London, U. K., 2003.

[12] J. Asensio, Curso de Metalografía Cuantitativa, E.T.S.I.M.O, Oviedo, España, 1992.

[13] J. E. Gruzsleski, Microstructure development during metalcasting, American Foundrymen’s Society Inc, Des Plaines, I. L., 2000. p. 193.

[14] J. E. Gruzsleski y B. M. Closset, The treatment of liquid Al-Si alloys, American Foundrymen’s Society Inc, Des Plaines, I. L. 1990, p. 143

[15] J. G. Kaufman And E. L. Rooy, Aluminium alloys castings. Properties, processes and applications. A. S. M. International. Materials Park O. H., 2004. p. 29.

[16] A. Srinivasan, U. T. S. Pillai, V. Jonh And B.C. Pai, Mater. Manuf. Process. 20 (2005) 221-223. doi:10.1081/AMP-200041867

[17] O. Vorren, J.E. Evensen, T.B. Pedersen, A. F. S. Transactions 92 (1984) 459-464.

[18] B. Suárez-Peña, J. Asensio-Lozano. Microstructural Effects of Phosphorous on Pressure Die Cast Al-12Si Alloys. Submitted for publication to Rev Metal Madrid (August 2006).

[19] M. F. Ashby, Materials Selection in Mechanical Design, Pergamon Press, Oxford, 1993, pp. 66-69.

[20] J. A. Pero-Sanz, Ciencia e Ingeniería de Materiales, C. I. E. Inversiones Editoriales – Dossat 2000, Madrid, 2000, pp. 606-608.

[21] B. Suárez-Peña, J. Asensio-Lozano. Mater Char 57 (2006) 218-226. doi:10.1016/j.matchar.2006.01.015

[22] N.M. Mawsouf, Mater. Sci. Technol. 16 (2000) 315-320.

Downloads

Published

2007-08-30

How to Cite

Suárez-Peña, B., Asensio-Lozano, J., Verdeja-González, J. I., & Pero-Sanz Elorz, J. A. (2007). Microstructural characterization and process selection by attributive analysis of eutectic and quasi-eutectic Al-Si alloys for pressure die casting. Revista De Metalurgia, 43(4), 310–317. https://doi.org/10.3989/revmetalm.2007.v43.i4.76

Issue

Vol. 43 No. 4 (2007)

Section

Articles

License

Copyright (c) 2007 Consejo Superior de Investigaciones Científicas (CSIC)

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.

All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.

Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
Crossref
Scopus
Google Scholar
Europe PMC