Carbon and chrome influence on tribological behaviour of iron alloys

Authors

  • A. García Escuela Politécnica Superior. Universidade da Coruña
  • C. Rico Escuela Politécnica Superior. Universidade da Coruña
  • Á. Varela Escuela Politécnica Superior. Universidade da Coruña
  • S. Naya Escuela Politécnica Superior. Universidade da Coruña
  • R. Losada Escuela Politécnica Superior. Universidade da Coruña
  • L. García Escuela Politécnica Superior. Universidade da Coruña

DOI:

https://doi.org/10.3989/revmetalm.2005.v41.iExtra.1083

Keywords:

Wear, Hardness, Microstructure, Chromium, Carbon

Abstract


This study compares the abrasive wear resistance of a carbon steel, used in the linings of coal mills, and ferrous alloys with different chromium and carbon content. It also analyses the influence of chromium and carbon content on mechanical properties, such as hardness, and microstructure. The abrasive wear resistance of the different materials was determined by means of ASTM G 105, "Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Test". A blasting test was used to study erosive wear resistance.

Downloads

Download data is not yet available.

Downloads

Published

2005-12-17

How to Cite

García, A., Rico, C., Varela, Á., Naya, S., Losada, R., & García, L. (2005). Carbon and chrome influence on tribological behaviour of iron alloys. Revista De Metalurgia, 41(Extra), 493–497. https://doi.org/10.3989/revmetalm.2005.v41.iExtra.1083

Issue

Section

Articles

Most read articles by the same author(s)

<< < 1 2 3