Self-sealing of unsealed aluminium anodic oxide films in very different atmospheres
DOI:
https://doi.org/10.3989/revmetalm.2003.v39.iExtra.1106Keywords:
Aluminium, Anodising, Sealed specimens, Unsealed specimens, Self-sealingAbstract
It is widely believed that the corrosion resistance behaviour of bare aluminium in natural environments is superior to that of unsealed anodised aluminium. However, results obtained in the exposure of unsealed anodised aluminium specimens with three different film thicknesses, in 9 atmospheres of Ibero-America with salinity levels between 3.9 and 517 mg.m-2.d-1 chloride, clearly shows the reverse to be true. After a sufficient time, which is shorter the higher the precipitation rate and the environmental relative humidity, a self-sealing process takes place, leading to coatings that surpass the quality standards demanded in industrial practice. Anodic films, sealed and unsealed, are protective coatings whose quality improves with ageing in most natural environments.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2003 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
