Mechanical characterization of porous Ti base alloys produced by sintering space-holder method
DOI:
https://doi.org/10.3989/revmetalmadrid.02.2XIIPMSKeywords:
Ti, Ti6Al4V, Space-holder sintering, Stiffness, Mechanical strengthAbstract
The search of suitable materials for use as an implant involves more research of biomaterials, like titanium and its alloys. Regarding their mechanical properties, it must be guaranteed mechanical strength to support loads in use, as well as its stiffness must be similar to the bone. In this paper it have been measured several mechanical properties of porous titanium and Ti6Al4V alloy, produced by sintering powder metallurgy with space-holder method. The results show the relationship between porosity and mechanical properties and it is indicated in which cases it is presented a compromise between the stiffness and mechanical strength.
Downloads
References
[1] B.D. Ratner, A.S. Hoffman, F.J. Schoen y J.E. Lemons, Biomaterials Science: An introduction to materials in medicine, Elsevier Academic Press, California, EE. UU., 2004, pp. 137-152.
[2] I.H. Oh, H. Segawa, N. Nomura y S. Hanada, Mater. Trans. 44 (2003) 657-660. doi:10.2320/matertrans.44.657
[3] C.F. Li, Z.G. Zhu y T. Liu, Powder Metall. 48 (2005) 237-240. doi:10.1179/174329005X64162
[4] S.J. Simske, R.A. Ayers y T.A. Bateman, Mater. Sci. Forum 250 (1997) 151-182. doi:10.4028/www.scientific.net/MSF.250.151
[5] M. Vallet-Regí y L.Munuera, Biomateriales, aquí y ahora, Ed. Dykinson, Madrid, España, 2000, p. 267.
[6] M. Comín, J.L. Peris, J.M. Prat, J.R. Decoz, P.M. Vera y J.V. Hoyos, Biomecánica de la fractura ósea y técnicas de reparación, Ed. Publicaciones UPVIBV, Valencia, España, 1999, pp. 65-121.
[7] J.P. Li, S.H. Li, C.A. Van-Blitterswijk y K. De-Groot, J. Mater. Sci.: Materials in Medicine 17 (2006) 179-185. doi:10.1007/s10856-006-6822-4 PMid:16502251
[8] M. Geetha, A.K. Singh, R. Asokamani y A.K.Gogia, Prog.Mater. Sci. 54 (2009) 397-425. doi:10.1016/j.pmatsci.2008.06.004
[9] Z. Esen y S. Bor, Scr.Mater. 56 (2007) 341-344. doi:10.1016/j.scriptamat.2006.11.010
[10] N. Ibris y J.C.Mirza-Rosca, J. Electroanal. Chem. 526 (2002) 53-62. doi:10.1016/S0022-0728(02)00814-8
[11] V. Amigó y A.V. Escuder,Materials per al disseny industrial. Aliatges metàl.lics, Ed. Publicaciones UPV, Valencia, España, 2003, pp. 176-182.
[12] C. Leyens y M. Peters, Titanium and Titanium Alloys. Fundamentals and Applications, Ed.Wiley VchGmbh&Co, Weinheim, Alemania, 2003, p. 423.
[13] R.B. Heimann, CMU. Journal, 1 (2002) 23-46.
[14] ASM Handbook vol.9: Metallography and Microstructures, ASM International, Ohio, EE. UU., 2004, pp. 964-966.
[15] L.J.Gibson, Ann. Rev.Mater. Sci. 30 (2000) 191-227. doi:10.1146/annurev.matsci.30.1.191
[16] L. Reig, Tesis Doctoral, Instituto de Tecnología de Materiales, Universidad Politécnica de Valencia, 2010.
[17] Handbook of Non-Ferrous Metal Powders: Technologies and Applications, ASM Handbook, 2009, pp. 221-223.
[18] M. Bram, C. Stiller, H.P. Buchkremer, D. Stöver y H. Baur, Adv. Eng. Mater. 2 (2000) 196-199. doi:10.1002/(SICI)1527-2648(200004)2:4<196::AID-ADEM196>3.0.CO;2-K
[19] L.J.Gibson yM.F.Ashby,Cellular Solids: Structure and Properties (Second edition), Cambridge University Press, Cambridge, Inglaterra, 1997, pp. 175-231.
[20] H.P. Degischer y B. Kriszt, Handbook of Cellular Metals: Production, Processing, Applications, Ed. Wiley VchGmbh&Co, Weinheim, Alemania, 2002, pp. 179-190.
[21] C.E.Wen, Y. Yamada, K. Shimojima, Y. Chino, T.Asahina yM.Mabuchi, J.Mater. Sci.:Materials in Medicine 13 (2002) 397-401. doi:10.1023/A:1014344819558 PMid:15348615
[22] K.Asaoka yM. Kon, Thermec’2003, pts 1-5, 426-4, Madrid, España, 2003, pp. 3.079-3.084.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2010 Consejo Superior de Investigaciones Científicas (CSIC)

This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.