Superbainite. A novel very strong bainitic microstructure
DOI:
https://doi.org/10.3989/revmetalm.2005.v41.i3.204Keywords:
Bainite, retained austenite, steels, phase TransformationsAbstract
In this work very recent results are shown that reveals the possibility of obtaining bainite by isothermal transformation at very low temperatures, of about 150°C, in high carbon high silicon steels. The microstructure thus obtained is a mixture of fine plates of bainitic ferrite (20-40 nm thickness) and thin films of carbon enriched austenite. These microstructures are very hard (600 HV) and strong (2.5 GPa).
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2005 Consejo Superior de Investigaciones Científicas (CSIC)

This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.