Desarrollo de Simuladores para Procesos Industriales. Parte III (Colada continua)

A. Ramírez; R. Morales; A. J. Morales; A. Ramos; G. Solorio

doi:10.3989/revmetalm.2006.v42.i3.21

Development of industry processes simulators. Part III (Continuous casting)

Authors

A. Ramírez Instituto Politécnico Nacional (SEPI-ESIME-UPT-IPN).
R. Morales Instituto Politécnico Nacional (SEPI-ESIQIE-UPALM-IPN)
A. J. Morales Instituto Politécnico Nacional (SEPI-ESIQIE-UPALM-IPN)
A. Ramos Instituto Tecnológico de Morelia Michoacán
G. Solorio Universidad Michoacana de San Nicolás de Hidalgo

DOI:

https://doi.org/10.3989/revmetalm.2006.v42.i3.21

Keywords:

Continuous casting, Solidification, Stochastic methods, Grains and dendrites

Abstract

This work was written for illustrating the use of Monte Carlo methods and generating of random number in combination with the information of the simulation system for thermal behavior described previously in order to reproduce in a computer the solidification process of the steel and simulate the formation of structures of casting step by step.

Downloads

Download data is not yet available.

References

[1] A. Ramirez, R. Morales, A. Ramos Y G. Solorio, Rev. Metal. Madrid 42 (2006), 203-208.

[2] A. Ramirez, A. Mosqueda, V. Sauce, R. Morales, A. Ramos Y G. Solorio, Rev. Metal. Madrid 42 (2006), 209-215.

[3] M.C. Flemings, Solidification Processing, Ed. McGraw, Hill Book Co., New York, EE.UU., 1974, pp. 130-140.

[4] W. Oldfield, ASM Trans. 59 (1966) 945-961.

[5] N. Provatas, N. Goldenfield Y A. Dantzing, Phys. Rev. Lett. 80 (1998) 3.308-3.311.

[6] W. Feng, Q. Xu Y B. Liu, ISIJ 42 (2002) 702-707. doi:10.2355/isijinternational.42.702

[7] N.P. Louat, Acta Metall 22 (1974) 721-726. doi:10.1016/0001-6160(74)90081-9

[8] N.P. Louat Y M.S. Duesbery, Mater. Sci. Forum (1992) 67-76 y 94-96.

[9] O.M. Ivasishin, S.V. Shevchenko Y N.L. Vasiliev, Acta Mater. 51 (2003) 1.019-1.034.

[10] A.M. Gusak Y K.N. Tu, Acta Mater. 51 (2003) 3.895-3.904.

[11] C.W. Lan, Y.C. Chang Y C.J. Shih, Acta Mater. 51 (2003) 1.857-1.869.

[12] E.A. Holm, M.A. Miodownik Y A.D. Rollett, Acta Mater. 51 (2003) 2.701-2.716.

[13] S. Mishra Y T. Debroy, Acta Mater. 52 (2004) 1.183-1.192.

[14] C.E. Krill III Y L.Q. Chen, Acta Mater. 50 (2002) 3.057-3.073.

[15] A. Carpinteri, B Chiaia, P. Cornetti, Mater. Sci. Eng. A 365 (2004) 235-240. doi:10.1016/j.msea.2003.09.033

[16] H. Yoshioka, Y. Tada Y Y. Hayashi, Acta Mater. 52 (2004) 1.515-1.523.

[17] Y.J. Lan, D.Z. Li Y Y.Y. Li, Acta Mater. 52 (2004) 1.721-1.729.

[18] K. Yee Y C. P. Hong, ISIJ 37 (1997) 38-46. doi:10.2355/isijinternational.37.38

[19] Y. H. Shin Y C. P. Hong, ISIJ 42 (2002) 359-367. doi:10.2355/isijinternational.42.359

[20] M. F. Zhu Y C. P. Hong, ISIJ 41 (2001) 436-445. doi:10.2355/isijinternational.41.436

[21] M. F. Zhu, J. M. Kim Y C. P. Hong, ISIJ 41 (2001) 992-998. doi:10.2355/isijinternational.41.992

[22] M. Qan Y Z.X.Guo, Mater. Sci. Eng. A 365 (2004) 180-185. doi:10.1016/j.msea.2003.09.025

Downloads

Published

2006-06-30

How to Cite

Ramírez, A., Morales, R., Morales, A. J., Ramos, A., & Solorio, G. (2006). Development of industry processes simulators. Part III (Continuous casting). Revista De Metalurgia, 42(3), 216–221. https://doi.org/10.3989/revmetalm.2006.v42.i3.21

Download Citation

Issue

Vol. 42 No. 3 (2006)

Section

Articles

License

This work is licensed under a Creative Commons Attribution 4.0 International License.

© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.

All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.

Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.