Microstructural characterization of the intermetallic compound AI7Cu4Ni
DOI:
https://doi.org/10.3989/revmetalm.2004.v40.i2.251Keywords:
compounds, Al7Cu4Ni, microstructural characterization.Abstract
A study of the microstructural characterization of the intermetallic compound Al7Cu4Ni was carried out. The intermetallic compound was fabricated using the melting and casting process followed by a homogenization treatment at 750 °C for 240 h. The structural evolution during homogenizing was analyzed by X-ray diffraction. The microstructure of intermetallic compound was also characterized by scanning electron and transmission electron microscopies. Additionally, the microhomogeneity of this compound was studied by the Energy Dispersive and Wavelength Dispersive Spectroscopy. The results of this work showed that it was possible to obtain the intermetallic compound with the crystalline structure and at the composition reported in the literature. Besides, this compound showed a good chemical microhomogeneity, which makes it a possible candidate as a material reference for either microanalysis or hardness testing.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2004 Consejo Superior de Investigaciones Científicas (CSIC)

This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.