The influence of temperature on the tensile properties of a superduplex stainless steel
DOI:
https://doi.org/10.3989/revmetalm.2001.v37.i2.456Keywords:
Duplex stainless steels, Tensile behavior, Dynamic strain aging (DSA), Strain rate sensitivity (SRS),Abstract
Tensile tests, at temperatures ranging between 275 and 475 °C were performed in a superduplex stainless steel EN 1.4410. The dependence of yield stress and ultimate tensile strength on temperature indicates the existence of dynamic strain aging (DSA). In order to evaluate the influence of strain rate on this phenomenon, tests were conducted at two different strain rates, both at 325 °C, temperature at which DSA is maximum for this material. The results show that the flow stress has an inverse strain rate sensitivity which confirms the existence of DSA in the steel under study.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2001 Consejo Superior de Investigaciones Científicas (CSIC)

This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.







