Algorithm approach for wear calculation on metallic junctions of machine elements
DOI:
https://doi.org/10.3989/revmetalm.2000.v36.i6.592Keywords:
Wear, Tribology, FrictionAbstract
Tribological properties of since materials for friction pairs are nowadays part of the tecnological requirements they have a decisive influence on the useful life of these pairs. An essential parameter to be measured is the wear undergone by materials that is caused during their perfomance. These measures can be taken in both lab or field testing, but they can be also calculated. For this, the wear mechanism must be taken into account. In the present paper, an algorithm for the calculation of wear based on the main disperse recommendations from the specialized literature is given.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2000 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
