Incidence of the annealing under nitrogen atmosphere on the grain size, texture and core losses (10-1000 Hz) in Fe - 6.4 % Si microcrystalline ribbons obtained by rapid quenching
DOI:
https://doi.org/10.3989/revmetalm.1998.v34.iExtra.755Keywords:
Rapid quenching, High silicon magnetic steel sheets, Annealing cycle, Grain size, Textures, Core lossesAbstract
In the present research, high silicon (6.4%) - iron microcrystalline ribbons were obtained by rapid quenching. In this material the incidence of the atmosphere (N2) and the annealing temperature (900-1,100°C) on the micrographic structure, grain size and texture and, as a consequence, in the total core losses ((1.0 T) 10-1000 Hz) were studied. The analysis of the results shows that the core losses are, in all cases, lower than those of the highest grade of conventionally processed nonoriented magnetic steel sheets, this becoming specially noticeable in the frequency range between 50-400 Hz.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1998 Consejo Superior de Investigaciones Científicas (CSIC)

This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.