Tecnología de fabricación de arrabio con inyección de combustibles y otros materiales por toberas en el horno alto.  III parte. Inyección de mezclas combustibles y otros materiales no combustibles

L. García; A. Cores; A. Formoso; A. Babich; S. Yaroshevskii

doi:10.3989/revmetalm.1998.v34.i4.801

Ironmaking technology with fuels and other materials injection in blast furnace tuyeres. Part 3. Injection of fuels mixtures and other non fuel materials

Authors

L. García Unión de Empresas de Recuperación de Materias Primas
A. Cores Centro Nacional de Investigaciones Metalúrgicas, CENIM (CSIC)
A. Formoso Centro Nacional de Investigaciones Metalúrgicas, CENIM (CSIC)
A. Babich Donetsk State University of Technology
S. Yaroshevskii Donetsk State University of Technology

DOI:

https://doi.org/10.3989/revmetalm.1998.v34.i4.801

Keywords:

Ironmaking, Fine iron oxide, Coal injection, Combustión rate, Direct and indirect reduction, Specific combustión heat

Abstract

The injection of non fuel materials (iron ores, fluxs, slags, ilmenite sands), siderurgical wastes, plastics, and others, both in single form and in mixture with pulverized coal, is analyzed. As the characteristics of the injected materials, variations in the operation of blast furnace can be introduced.

Downloads

Download data is not yet available.

Downloads

Published

1998-08-30

How to Cite

García, L., Cores, A., Formoso, A., Babich, A., & Yaroshevskii, S. (1998). Ironmaking technology with fuels and other materials injection in blast furnace tuyeres. Part 3. Injection of fuels mixtures and other non fuel materials. Revista De Metalurgia, 34(4), 348–357. https://doi.org/10.3989/revmetalm.1998.v34.i4.801

Download Citation

Issue

Vol. 34 No. 4 (1998)

Section

Reviews

License

This work is licensed under a Creative Commons Attribution 4.0 International License.

© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.

All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.

Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.