Improvement in steel quality obtained by continuous casting by means of electrophysical influences

Authors

  • V. Shklyar Universidad Estatal Tecnológica de Donetsk
  • L. García Unión de Empresas de Recuperación de Materias Primas
  • A. Formoso Centro Nacional de Investigaciones Metalúrgicas, CENIM (CSIC)
  • A. Cores Centro Nacional de Investigaciones Metalúrgicas, CENIM (CSIC)

DOI:

https://doi.org/10.3989/revmetalm.1998.v34.i6.816

Keywords:

Magnetic shaping, Electromagnetic casting, Continuous casting of steel

Abstract


Laboratory tests with tin smelted in a crucible and industrial tests with crude steel poured in moulds had been carried out. These metals were subjected to electrophysical influences. As a result of the applied electric field, it is observed in tin that during the solidification, the crystalization temperature and the solidification time are changed. Crystal growth in the electric field direction and an increase of the fracture limit in the steel ingot are observed.

Downloads

Download data is not yet available.

Downloads

Published

1998-12-30

How to Cite

Shklyar, V., García, L., Formoso, A., & Cores, A. (1998). Improvement in steel quality obtained by continuous casting by means of electrophysical influences. Revista De Metalurgia, 34(6), 482–487. https://doi.org/10.3989/revmetalm.1998.v34.i6.816

Issue

Section

NO_SECCION_SI_RESUMEN

Most read articles by the same author(s)

1 2 3 4 > >>