Influence of dispersoids on the creep behavior of dispersion strengthened aluminum materials
Keywords:Creep, Al alloys, Dispersion strengthened alloys
The creep behavior of a rapidly solidified Al-6.5%Fe-0.6%V-1.3%Si dispersion strengthened material containing 16 volume % of dispersoids has been studied by means of tensile tests at high temperatures from 483 to 821 K. The imposed strain rates ranged from 2.5∙10-6 to 10-2s-1. The microstructure was very fine, consisting of submicron grains and small hard round-shaped dispersoids of about 54 nm. The creep behavior was characterized by high apparent stress exponents and high activation energies that are not accurately predicted by models from the literature. Therefore, a creep equation is developed to describe the creep behavior of the studied aluminum dispersion strengthened material and other materials with similar microstructures. The proposed equation is a generalization of conventional slip creep equations without the use of a threshold stress.
Download data is not yet available.
How to Cite
Carreño, F., & Ruano, O. A. (1997). Influence of dispersoids on the creep behavior of dispersion strengthened aluminum materials. Revista De Metalurgia, 33(5), 324–332. https://doi.org/10.3989/revmetalm.1997.v33.i5.845
Copyright (c) 1997 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.