Ageing of anodized aluminium insufficiently sealed
DOI:
https://doi.org/10.3989/revmetalm.1996.v32.i5.895Keywords:
Sealing, Anodized aluminium, Ageing, Atmosphere, AdditivesAbstract
In this paper, the different qualities of sealing of aluminium anodic films obtained in de-ionized and in acetate and triethanolamine solutions at 50 °C (temperature much lower than the one used in the traditional hydrothermal sealing) are studied. The standardized dye absorption, acid dissolution and admittance at 1 kHz tests have been employed, and measurements of electrochemical impedance spectroscopy have been carried out. The effect of the ageing in the atmosphere on the films sealed in these conditions and the increase of their degree of sealing which spontaneously takes place, are also studied.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1996 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
