Optimization of the technological parameters for obtaining brass details by powder metallurgy
DOI:
https://doi.org/10.3989/revmetalm.1995.v31.i6.939Keywords:
Brass details, Powder metallurgyAbstract
Powders of brass 60 (40 % Zn) and brass 80 (20 % Zn) have been produced by spraying molten metal with water at high pressure in the powder metallurgy plant belonging to the Metallurgical Research Centre (CIME) in Havana. A physical-chemical and technological characterization of the powders has been carried out and the optimum parameters have been determined for the formation and sintering of details from these powders. The mechanical properties of these details can rival bronze and iron in applications such as in household electrical goods and in construction.
Downloads
Download data is not yet available.
Downloads
Published
1995-12-30
How to Cite
Krivij, N., Suwardjo, W., & Cores, A. (1995). Optimization of the technological parameters for obtaining brass details by powder metallurgy. Revista De Metalurgia, 31(6), 394–399. https://doi.org/10.3989/revmetalm.1995.v31.i6.939
Issue
Section
Technical Notes
License
Copyright (c) 1995 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
