Dynamic modeling of semiautogenous milling based on a simplified phenomenological model
DOI:
https://doi.org/10.3989/revmetalm.1995.v31.i2.972Keywords:
Semiautogenous milling, Mathematical modeling, Comminution processesAbstract
A dynamic simplified model for semiautogenous grinding developed on a phenomenological basis is presented. An equation for the pulp transport through the mill is proposed. Internal classification is described by means of a function sensitive to the pulp density inside the mill. Consistency of the model is shown on the basis of an extensive pilot testing in a 6' x 2' (diameter x length) cascade mill. The effect of the feed rate, feed size distribution and ball filling on the metallurgical response of the mill are shown.
Downloads
Download data is not yet available.
Downloads
Published
1995-04-30
How to Cite
Magne, L., Améstica, R., Barría, J., & Menacho, J. (1995). Dynamic modeling of semiautogenous milling based on a simplified phenomenological model. Revista De Metalurgia, 31(2), 97–105. https://doi.org/10.3989/revmetalm.1995.v31.i2.972
Issue
Section
NO_SECCION_SI_RESUMEN
License
Copyright (c) 1995 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
