Friction drilling of dual phase steels
DOI:
https://doi.org/10.3989/revmetalm.1109Keywords:
Friction drilling, High strength steels, Dual phase steelsAbstract
This work describes the experimental study of the friction drilling process in dual phase (DP) steels, with yield strengths from 600 to 800 Mpa. The optimal machining conditions with different thicknesses was assessed through controlled tests at different rotation speeds and feed rates. On one hand, the torque and the thrust force were computed and monitorized. On the other hand, the dimensional tolerances of the holes were evaluated. Another topic of interest inherent to this special technique is the temperature level reached during the friction process which is crucial when it comes to development of microstructural transformations. This thermal condition can transform the mechanical properties of material near the hole and the burr.
Downloads
References
[1] J.L Bocos, F. Zubiri, F. Garciandía, J. Peña, A. Cortiella, J. M. Berrueta y F. Zapiráin, Rev. Metal. Madrid 40 (2004) 146-151.
[2] W.L. Weingaertner, F. Tikal y J.C. Lopes, Int. J. Manuf. Sci. Prod. 1 (1997) 41-50.
[3] S.F. Miller, R. Li, H. Wang, y A.J. Shih, Int. J. Manuf. Sci. Eng. 128 (2006) 802-810. http://dx.doi.org/10.1115/1.2193554
[4] J. Qu y P.J. Blau, Int. J. Manuf. Sci. Eng. (2008) 130.
[5] S.F. Miller, J. Tao y A.J. Shih, Int. J. Mach. Tool. Manu. 46 (2006) 1.526-1.535.
[6] S.F. Miller, P.J. Blau y A.J. Shih, Int. J. Mach Tool. Manu. 47 (2007) 1.636-1.645.
[7] S.M. Lee, H. Ming-Cho, F. Yuan-Huang y B. Hwa-Yan, Int. J. Mach. Tool. Manu. 49 (2009) 81-88. http://dx.doi.org/10.1016/j.ijmachtools.2008.07.012
[8] S.M. Lee, H. Ming-Cho y L. Dai-Yang, J. Mater. Process. Tech. 207 (2008) 81-88.
[9] W.L. Weingaertner, F. Tikal y J.C. Lopes, Int. Manuf. Eng. Conference, Connecticut, EE.UU., 1996, pp. 227-231.
[10] A. J. Hoogenboom, EE.UU., Patent Nº 4 454 741 (1984).
[11] G.D. Head, W.C. Le Master, L.P. Bredesky, and D.C. Winter, EE.UU, Patent Nº 4 428 214 (1984).
[12] M. Eckhardt, Tesis Doctoral, Facultad de Ingeniería Mecánica, Universidad Federal de Santa Catarina, 2003.
[13] S.F. Miller, Tesis Doctoral, Facultad de Ingeniería Mecánica, Michigan University, 2006.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2012 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.