The constraint factor and its size dependence in DC(T) fracture specimens
DOI:
https://doi.org/10.3989/revmetalm.2002.v38.i5.415Keywords:
Elastic-plastic fracture, Constraint, Common format, Fracture toughness,Abstract
The Common Format Equation constraint factor, Ω*, introduced by Donoso and Landes, is analyzed in terms of its dependence on crack length and thickness, in disk-shaped compact specimens, DC(T). Numerical analysis of the load-displacement behavior of blunt-notched DC(T) specimens, and experimental evaluation of pre-cracked DC(T) specimens of various thickness, allows one to obtain the values of Ω* in terms of the thickness-to-ligament ratio, B/b, as a measure of the degree of size-induced constraint in this geometry.
Downloads
Download data is not yet available.
Downloads
Published
2002-10-30
How to Cite
Donoso, J. R., Cancino, C., & Muehlich, U. (2002). The constraint factor and its size dependence in DC(T) fracture specimens. Revista De Metalurgia, 38(5), 326–333. https://doi.org/10.3989/revmetalm.2002.v38.i5.415
Issue
Section
Articles
License
Copyright (c) 2002 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.