Comportamiento a fatiga de baja frecuencia del compuesto Rene®80 recubierto de aluminuro de platino cerca y por encima del DBTT
DOI:
https://doi.org/10.3989/revmetalm.179Palabras clave:
Aluminuro de platino, DBTT, Fatiga a baja frecuencia, Fractografía, Rene®80Resumen
La superaleación Rene®80 a base de Ni se utiliza para fabricar álabes de turbinas de gas en motores a reacción. La vida útil de algunas palas de turbina de motores a reacción está limitada por la fatiga de baja frecuencia y esta propiedad se ha visto fuertemente afectada por los revestimientos. La temperatura de transición de dúctil a frágil (DBTT) es el factor más importante que afecta las propiedades mecánicas de las aleaciones recubiertas. En este estudio, se evaluó el comportamiento de fatiga a alta temperatura y baja frecuencia del compuesto Rene®80 sin recubrimiento y recubierto con aluminuro de platino (Pt-Al) a temperaturas de 871 °C (cerca del DBTT) y 982 °C (por encima del DBTT). Los resultados de las pruebas de fatiga, en condiciones de deformación controlada a 871 °C para R = 0 y una tasa de deformación de 2×10-3 s-1, en un intervalo de deformación total de 0,8%, mostraron una disminución de la resistencia a la fatiga de las muestras recubiertas de aproximadamente un 14%, en comparación con las no recubiertas. Sin embargo, el aumento de la temperatura de prueba de 871 °C a 982 °C, condujo a un aumento en el comportamiento a fatiga de baja frecuencia del compuesto Rene®80 recubierto en aproximadamente un 10% en comparación con las muestras sin recubrir.
Descargas
Citas
Alam, M.Z., Chatterjee, D., Kamat, S.V., Jayaram,V., Das, D.K. (2010). Evaluation of ductile-brittle transition temperature (DBTT) of aluminide bond coats by micro-tensile test methods. Mater. Sci. Eng. A 527 (26), 7147-7150. https://doi.org/10.1016/j.msea.2010.07.059
Alam, M.Z., Srivathsa, B., Kamat, S.V., Jayaram, V., Das, D.K. (2011). Study of brittle-to-ductile-transition in Pt-aluminide bond coat using micro-tensile testing method. Trans. Indian Inst. Met. 64 (57), 57-61. https://doi.org/10.1007/s12666-011-0011-y
Bannantine, J.A., Comer, J.J., Handrock, J.L. (1990). Fundamentals of Metal Fatigue Analysis. Printice Hall.
Barjesteh, M.M., Zangeneh-Madar, K., Abbasi, S.M., Shirvani, K. (2019a). The effect of platinum-aluminide coating features on high temperature fatigue life of nickel-based superalloy Rene®80. J. Min. Metall. B 55 (2), 235-251. https://doi.org/10.2298/JMMB181214029B
Barjesteh, M.M., Abbasi, S.M., Zangeneh-Madar, K., Shirvani, K. (2019b). Correlation between platinum-aluminide coating features and tensile behavior of nickel-based superalloy Rene@80. Rare Met. https://doi.org/10.1007/s12598-019-01293-4
Bose, S. (2007). High Temperature Coating. 1st Edition, Butterworth-Heinemann. https://doi.org/10.1016/B978-075068252-7/50006-8
Brown, C.U., Donmez, A. (2016). Microstructure Analysis for Additive Manufacturing: A Review of Existing Standards. National Institute of Standards and Technology, U.S. Department of Commerce. https://doi.org/10.6028/NIST.AMS.100-3
Cameron, D.W., Allegany, N.Y., Hoeppner, D.W. (1996). Fatigue and Fracture, Fatigue Properties in Engineering. ASM Handbook, Vol. 19, ASM International, pp. 36-56.
Campbell, F.C. (2012). Fatigue and fracture, Understanding the basics. ASM International. https://doi.org/10.31399/asm.tb.ffub.9781627083034
Chen, Y., Zhao, X., Bai, M., Chandio, A., Wu, R., Xiao, P. (2015). Effect of platinum addition on oxidation behaviour of γ/γ′ nickel aluminide. Acta Mater. 86, 319-330. https://doi.org/10.1016/j.actamat.2014.12.023
Gopinath, K., Gogia, A.K., Kamat, S.V., Balamuralikrishnan, R., Ramamurty, U. (2009). Low cycle fatigue behaviour of a low interstitial Ni-base superalloy. Acta Mater. 57 (12), 3450-3459. https://doi.org/10.1016/j.actamat.2009.03.046
Grote, K.H., Antonsson, E.K. (2010). Springer handbook of mechanical engineering. Part B, Applications in mechanical engineering. Springer Sci, USA. p.121. https://doi.org/10.1007/978-3-540-30738-9
Krishna, G.R., Das, D.K., Singh, V., Joshi, S.V. (1998). Role of Pt content in the microstructural development and oxidation performance of Pt aluminide coatings produced using a high-activity aluminizing process. Mater. Sci. Eng. A 251 (1-2), 40-47. https://doi.org/10.1016/S0921-5093(98)00655-8
Kuhn, H., Medlin, D. (2000). ASM Handbook Vol. 8, Mechanical Testing and Evaluation. Materials Park, Ohio, USA, pp. 152-163. https://doi.org/10.31399/asm.hb.v08.a0003266
Parlikar, C., Alam, M.Z., Chatterjee, D., Das, D.K. (2017). Thickness apropos stoichiometry in Pt-aluminide (PtAl) coating: Implications on the tensile properties of a directionally solidified Ni-base superalloy. Mater. Sci. Eng. A 682, 518-526. https://doi.org/10.1016/j.msea.2016.11.074
Pedraza, F., Kennedy, A.D., Kopecek, J., Moretto, P. (2006). Investigation of the microstructure of platinum-modified aluminide coatings. Surf. Coat. Tech. 200 (12-13), 4032-4039. https://doi.org/10.1016/j.surfcoat.2004.12.019
Rahmani, K., Nategh, S. (2008a). Influence of aluminide diffusion coating on the tensile properties of the Ni-base superalloy René 80. Surf. Coat. Tech. 202 (8), 1385-1391. https://doi.org/10.1016/j.surfcoat.2007.06.041
Rahmani, K., Nategh, S. (2008b). Low cycle fatigue mechanism of René 80 at high temperature-high strain. Mater. Sci. Eng. A 494 (1-2), 385-390. https://doi.org/10.1016/j.msea.2008.04.067
Rao, K.B.S. (2003). High temperature fatigue behaviour of intermetallics. Sadhana 28, 695-708. https://doi.org/10.1007/BF02706454
Rashidghamat, A., Shirvani, K. (2009). Electrodeposition of platinum on nickel-base superalloy Rene-80. In: EFC Workshop on Solutions for High Temperature Corrosion Protection in Energy Conversion System, Frankfurt, Germany.
Rush, M.T. (2012). Development of weld repair methods for Rene 80 nickel based superalloy. Ph.D thesis, Cranfield university, School of Applied Sciences.
Safari, J., Nategh, S. (2006). On the heat treatment of Rene-80 nickel-base superalloy. J. Mater. Process Tech. 176 (1-3), 240-250. https://doi.org/10.1016/j.jmatprotec.2006.03.165
Stephens, I., Fatemi, A., Stephens, R.R., Fuchs, H.O. (1980). Metal Fatigue in Engineering. A Wiley-interscience publication, John Wiley & Sons, 2nd Edition.
Tamarin, Y. (2002). Protective coatings for turbine blades. ASM International.
Vander Voort, G.F. (2004). ASM Handbook Vol. 9, Metallography and Microstructures. Materials Park, Ohio, USA, pp. 403-427. https://doi.org/10.31399/asm.hb.v09.a0003758
Vogel, D., Newman, L., Deb, P., Boone, D.H. (1987). Ductile-to-brittle transition temperature behavior of platinum-modified coatings. Mater. Sci. Eng. A 88, 227-231. https://doi.org/10.1016/0025-5416(87)90089-9
Walker, P., Tarn, W.H. (1991). CRC Handbook of metal etchants. CRC Press LLC. https://doi.org/10.1201/9780367803087
Yuan, K. (2013). Thermal and Mechanical Behaviors of High Temperature Coatings. Ph.D thesis, Linkoping University.
Zhang, X., Gao, H., Wen, Z., Zhang, H., Yue, Z. (2018). Low Cycle Fatigue Failure Analysis of a Ni-Based Single Crystal Superalloys at 850 °C. Adv. Eng. Mater. 21 (2), 1-11. https://doi.org/10.1002/adem.201800647
Zhang, L., Zhao, L.G., Roy, A., Silberschmidt, V.V., McColvin, G. (2019). Low-cycle fatigue of single crystal nickel-based superalloy - mechanical testing and TEM characterization. Mater. Sci. Eng. A 744, 538-547. https://doi.org/10.1016/j.msea.2018.12.084
Publicado
Cómo citar
Número
Sección
Licencia
Derechos de autor 2020 Consejo Superior de Investigaciones Científicas (CSIC)
Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.
© CSIC. Los originales publicados en las ediciones impresa y electrónica de esta Revista son propiedad del Consejo Superior de Investigaciones Científicas, siendo necesario citar la procedencia en cualquier reproducción parcial o total.Salvo indicación contraria, todos los contenidos de la edición electrónica se distribuyen bajo una licencia de uso y distribución “Creative Commons Reconocimiento 4.0 Internacional ” (CC BY 4.0). Puede consultar desde aquí la versión informativa y el texto legal de la licencia. Esta circunstancia ha de hacerse constar expresamente de esta forma cuando sea necesario.
No se autoriza el depósito en repositorios, páginas web personales o similares de cualquier otra versión distinta a la publicada por el editor.