Evolution of mechanical properties during crystallization of amorphous Mg-Ni ribbons
DOI:
https://doi.org/10.3989/revmetalm.2005.v41.iExtra.1033Keywords:
Magnesium alloys, Amorphous, Mechanical propertiesAbstract
The evolution of mechanical properties with temperature of rapidly solidified Mg23Ni and Mg-35Ni (mass %) have been studied by tensile tests. Both alloys crystallize in the test temperature range (room temperature-350 °C). The process takes place in two steps for Mg23Ni and in one step for Mg35Ni. The microstructural changes in the alloys by the crystallisation processes are responsible for mechanical properties evolution with temperature as well as for differences observed between both alloys.
Downloads
Download data is not yet available.
Downloads
Published
2005-12-17
How to Cite
Pérez, P., Garcés, G., Caruana, G., & Adeva, P. (2005). Evolution of mechanical properties during crystallization of amorphous Mg-Ni ribbons. Revista De Metalurgia, 41(Extra), 244–249. https://doi.org/10.3989/revmetalm.2005.v41.iExtra.1033
Issue
Section
Articles
License
Copyright (c) 2005 Consejo Superior de Investigaciones Científicas (CSIC)

This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.