Evolution of mechanical properties during crystallization of amorphous Mg-Ni ribbons

Authors

  • P. Pérez Centro Nacional de Investigaciones Metalúrgicas (CENIM), CSIC
  • G. Garcés Centro Nacional de Investigaciones Metalúrgicas (CENIM), CSIC
  • G. Caruana Centro Nacional de Investigaciones Metalúrgicas (CENIM), CSIC
  • P. Adeva Centro Nacional de Investigaciones Metalúrgicas (CENIM), CSIC

DOI:

https://doi.org/10.3989/revmetalm.2005.v41.iExtra.1033

Keywords:

Magnesium alloys, Amorphous, Mechanical properties

Abstract


The evolution of mechanical properties with temperature of rapidly solidified Mg23Ni and Mg-35Ni (mass %) have been studied by tensile tests. Both alloys crystallize in the test temperature range (room temperature-350 °C). The process takes place in two steps for Mg23Ni and in one step for Mg35Ni. The microstructural changes in the alloys by the crystallisation processes are responsible for mechanical properties evolution with temperature as well as for differences observed between both alloys.

Downloads

Download data is not yet available.

Downloads

Published

2005-12-17

How to Cite

Pérez, P., Garcés, G., Caruana, G., & Adeva, P. (2005). Evolution of mechanical properties during crystallization of amorphous Mg-Ni ribbons. Revista De Metalurgia, 41(Extra), 244–249. https://doi.org/10.3989/revmetalm.2005.v41.iExtra.1033

Issue

Section

Articles

Most read articles by the same author(s)

1 2 > >>