Bubbles size distribution in mechanical flotation cells at laboratory and industrial scale and modeling of the effects of the operating variables
DOI:
https://doi.org/10.3989/revmetalm.2008.v44.i3.111Keywords:
Bubble size distribution, Flotation, Modeling, Bubbles samplingAbstract
In this work, bubble size distribution in a flotation cell, in both industrial and laboratory scale, are characterized. Experimentally, bubbles are sampled, their sizes are measured using image analysis and their distributions are expressed by surface. The distributions are represented with a unique model structure for all tests, either in industrial or laboratory scale, only with different values in the parameters model. In the industrial case, with data reported in the literature as well as with experimental data obtained by the authors, the proposed model is fitted with correlation coefficients higher than 84 %. In the lab, the effects of the operational variables Jg y NS on the parameters d50 y l are modeled. From the experimental study at laboratory scale it is possible to conclude that combinations of NS y Jg allow producing different bubble size distributions.
Downloads
References
[1] B.K. Gorain, J.P. Fransidis y E.V. Mamlapig, Miner. Eng. 8 (1995) 615-635. doi:10.1016/0892-6875(95)00025-L
[2] J. Yianatos, L. Bergh, P. Condori y J. Aguilera, Miner. Eng. 14 (2001) 1.033-1.046.
[3] F. Chen, C. Gómez y J. Finch, Miner. Eng. 14 (2001) 427-432. doi:10.1016/S0892-6875(01)00023-1
[4] J. Hernández-Aguilar, R. Coleman, C. Gómez y J. Finch, Miner. Eng. 17 (2004) 53-61. doi:10.1016/j.mineng.2003.09.011
[5] R. Grau y K. Heiskanen, Miner. Eng. 18 (2005) 1.164-1.172.
[6] G. Vallebuona, A. Casali y W. Kracht, Rev. Metal. Madrid 41 (2005) 243-250.
[7] W. Kracht, G. Vallebuona y A. Casali, Miner. Eng. 18 (2005) 1.067-1.076.
[8] M. Bailey, J. Torralba, C. Gómez y J. Finch, Miner. Eng. 18 (2005) 125-126. doi:10.1016/j.mineng.2004.05.004
[9] S. Banisi y J.A Finch, Miner. Eng. 7 (1994) 1.555-1.559.
[10] G. Vallebuona, C. Suazo y A. Casali, Proc. COPPER 2003, III-Mineral Processing, Santiago, Chile, C. Gómez y C. Barahona (Eds.), 2003, pp. 211-224.
[11] R. Grau y K. Heiskanen, Miner. Eng. 16 (2003) 1.081-1.089.
[12] E. Girgin, S. Do, C. Gómez y J. Finch, Miner. Eng. 19 (2006) 201-203. doi:10.1016/j.mineng.2005.09.002
[13] C. Gómez, J. Hernández-Aguilar, G. Mcsorley, P. Voigt y J. Finch, Proc. COPPER 2003, III-Mineral Processing, Santiago, Chile, C. Gómez y C. Barahona (Eds.), 2003, pp. 225-240.
[14] F. Pitard, Pierre Gy’s Sampling Theory and Sampling Practice, CRC Press, 2da. Ed., Boca Raton, USA, 1993.
[15] J. Tucker, D. Deglon, J. Franzidis, M. Harris y C. O’connor, Miner. Eng. 7 (1994) 667-680. doi:10.1016/0892-6875(94)90098-1
[16] A. Casali, G. González, F. Torres, G. Vallebuona, L. Castelli y P. Giménez, Powder Technol. 99 (1998) 15-21. doi:10.1016/S0032-5910(98)00084-9
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2008 Consejo Superior de Investigaciones Científicas (CSIC)

This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.